The Lee Company

The Lee Company 6 mm Elastomer-Seat Plastic Press-In Check Valve

Official The Lee Company product page and PDS-210 for the 6 mm Press-In Zero Leak Check Valve, opened 18 November 2026, list a cartridge designed for installation into plastic housings, fittings or soft tubing: diameter 5.94 mm, 250 Lohms, elastomeric seat, and official materials 303 stainless body, 416 stainless cage, 302 stainless spring, 440C stainless ball, and EPDM or FKM seals. Official working pressure is dependent on housing material, configuration and operating conditions. Official PDS-210 states that these valves “are not designed to be installed into metal.” Official “zero drops/minute on hydraulic fluid” leakage wording is manufacturer test wording, not a YOCOOLING guarantee. Official part numbers (CZPM6001… FKM and CZPM6002… EPDM families) are configuration options, not a stock list. Send the official part number, flow orientation, housing plastic and quantity to enquire. Official sources: https://www.theleeco.com/product/6-mm-press-in-zero-leak-check-valve/ and https://www.theleeco.com/uploads/2024/08/PDS-210-2024-04-6mm-Zero-Leak-Press-In-Check-Valve.pdf

Mounting configuration
Press-in cartridge for a plastic housing; elastomeric valve seat
Part diameter
5.94 mm
Flow resistance
250 Lohms
Official Lohm rate
250 Lohms
Request a Quote

The Lee Company 6 mm Elastomer-Seat Plastic Press-In Check Valve

The Lee Company 6 mm Elastomer-Seat Plastic Press-In Check Valve

Specifications

ParameterValue
6 mm Zero Leak Press-In Check Valve
Mounting configurationPress-in cartridge for a plastic housing; elastomeric valve seat
Part diameter5.94 mm
Flow resistance250 Lohms
Component materials303 stainless body, 416 stainless cage, 302 stainless spring and 440C stainless ball; EPDM or FKM seal options
Example part cracking pressureCZPM6001004S: FKM seal and 4 ± 3 kPa nominal cracking-pressure example 1
Specifications
Official product name6 mm Press-In Zero Leak Check Valve (official product page and PDS-210, opened 18 November 2026)
Official mountingPress-in into plastic; diameter 5.94 mm. Official PDS-210: not designed to be installed into metal.
Official Lohm rate250 Lohms
Official materialsBody 303 SS; cage 416 SS; spring 302 SS; ball 440C SS; seal EPDM or FKM (official materials table)
Official datasheet URLhttps://www.theleeco.com/uploads/2024/08/PDS-210-2024-04-6mm-Zero-Leak-Press-In-Check-Valve.pdf
Notes 1
  1. One listed part example; application to water/glycol needs separate qualification