Loop position
Connection & Fluid Control
Cross-loop connection, transition, passive control, filtration, and monitoring components.

Other loop positions & product types
Browse the configurations below. Confirm interfaces, routing and mounting against your installation drawing.
Isolation Valves
Configurations 2 products
| Compare | Product / configuration | Quote |
|---|---|---|
SMCDirect-Acting Two-Port Water Solenoid ValveValves that open or close a liquid path.Configuration detailsOfficial SMC JSX catalog (ES70-56) opened 18 November 2026 describes a direct-operated 2-port solenoid-valve family for fluids including air, water, oil, steam, heated water and vacuum, with body, seal, port, orifice and coil options selected on the official how-to-order chart. The official catalog states IP67 / NEMA4X for the stainless-steel coil cover, and IP65 for models with a DIN terminal. This page remains a series reference; a single pressure rating is not assigned to every orifice or coil. Send a complete official JSX order code, fluid, body/seal materials and coil details to enquire. This page is not a stock list. | ||
GF Piping SystemsManual Thermoplastic Double-Union Ball ValveValves that open or close a liquid path.Configuration detailsOfficial Georg Fischer Piping Systems Type 546 Pro technical datasheet (11/2026-A 1271485), opened 18 November 2026, describes a thermoplastic ball valve for shutoff and regulating service. Official body materials are PVC-U, PVC-C, ABS, PP-H and PVDF; official O-ring options are EPDM, FKM and FFKM; official ball seats are PTFE and PVDF; the official lever material is PP-GF30. Official pressure levels on that datasheet are PN10 for ABS / PP-H and PN16 for PVC-U / PVC-C / PVDF; dimensions are listed as d16/DN10 – d110/DN100 (d160/DN150), ⅜” – 4” (6”). This page is a series reference: the exact official size, material, seal, seat, end connection and actuation must still be stated in a quote. The datasheet is not a Quick Connect Valve 700 document; QC700 facts are not applied here. The official datasheet states that its technical data are not binding unless confirmed in writing and do not constitute warranted characteristics; that disclaimer is manufacturer wording, not a YOCOOLING warranty. Send the complete official configuration and quantity to enquire. This page is not a stock, price or lead-time statement. |
FITOK BG 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
FITOKBG Three-Piece Full-Bore Isolation Ball ValveOfficial FITOK BG Series 3-piece ball-valve catalog and category were opened 18 November 2026.Manufacturer series: BGConfiguration detailsThis remains a series reference: body material, end form, seat and size must be fixed by a complete official order code. Send that code, end connections and the intended fluid and pressure-temperature duty to enquire. This page is not a stock list or a certification claim. |
BEEHE FND 3 products
| Compare | Product / configuration | Quote |
|---|---|---|
BEEHEFND Interlocking Supply/Return Ball-Valve PairValves that open or close a liquid path.Manufacturer series: FNDConfiguration detailsOfficial BEEHE FND Interlocked Ball Valve page opened 18 November 2026 describes a SUS304 pair of ball-valve bodies joined by a bidirectional interlock for connecting liquid-cooled cabinets to secondary-loop networks, with red and blue markings. The official series table lists FND25 (1 in.) and FND40 (2 in.), EPDM seals, 150 PSI maximum operating pressure, 300 PSI burst pressure, PG25 or DI water, and –15°C to 80°C. Final ends and sizes are selected from the official product list (hose barb, thread, 90° barb, or sanitary chuck). Send both official model codes, colours and end types to enquire. This page is not a stock list. Manufacturer service-life wording is not a YOCOOLING warranty. | ||
BEEHEFND 90° Hose-Barb Interlock Valve HalfValves that open or close a liquid path.Manufacturer series: FNDConfiguration detailsOfficial BEEHE FND product list opened 18 November 2026 includes 90° elbow barbed-fitting halves for FND25 and FND40, with separate blue and red markings, as interface choices for a matched interlocking pair. Series ratings (SUS304, EPDM, 150 PSI operating / 300 PSI burst, –15°C to 80°C, PG25/DI water) remain series-table values. The exact official model, hose ID and colour must still be selected from that list. Send the official model code and the mating half to enquire. This page is not a stock list and does not assign one listed part number as inventory. | ||
BEEHEFND Sanitary-Clamp Interlock Valve HalfValves that open or close a liquid path.Manufacturer series: FNDConfiguration detailsOfficial BEEHE FND product list opened 18 November 2026 includes 25 mm and 40 mm sanitary-chuck halves for FND25 and FND40, with separate colour markings, as interface choices for a matched interlocking pair. Series ratings remain the official series-table values. Send the official model code, chuck size, gasket and the mating half to enquire. This page is not a stock list and does not assign one listed part number as inventory. |
SMC VNB 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
SMCVNB Pilot-Operated Two-Port Process ValveValves that open or close a liquid path.Manufacturer series: VNBConfiguration detailsOfficial SMC VNB catalog opened 18 November 2026 describes a 2-port process valve for flow control, available as air-operated or external-pilot solenoid forms, with N.C., N.O. and C.O. types, screw-in sizes 6A to 50A and flange sizes 32F to 50F. Body materials (copper alloy, aluminum, stainless steel) and seal materials (NBR, FKM, EPDM) are selected against the official applicable-fluids checklist; water is listed for specified body/seal combinations and temperature limits in that table. This page remains a series reference. Send a complete official VNB order code, body/seal materials and the intended fluid to enquire. This page is not a stock list. |
Check Valves
Configurations 4 products
| Compare | Product / configuration | Quote |
|---|---|---|
The Lee Company6 mm Elastomer-Seat Plastic Press-In Check ValveValves that limit reverse flow through a liquid path.Configuration detailsOfficial The Lee Company product page and PDS-210 for the 6 mm Press-In Zero Leak Check Valve, opened 18 November 2026, list a cartridge designed for installation into plastic housings, fittings or soft tubing: diameter 5.94 mm, 250 Lohms, elastomeric seat, and official materials 303 stainless body, 416 stainless cage, 302 stainless spring, 440C stainless ball, and EPDM or FKM seals. Official working pressure is dependent on housing material, configuration and operating conditions. Official PDS-210 states that these valves “are not designed to be installed into metal.” Official “zero drops/minute on hydraulic fluid” leakage wording is manufacturer test wording, not a YOCOOLING guarantee. Official part numbers (CZPM6001… FKM and CZPM6002… EPDM families) are configuration options, not a stock list. Send the official part number, flow orientation, housing plastic and quantity to enquire. Official sources: https://www.theleeco.com/product/6-mm-press-in-zero-leak-check-valve/ and https://www.theleeco.com/uploads/2024/08/PDS-210-2024-04-6mm-Zero-Leak-Press-In-Check-Valve.pdf | ||
The Lee Company6.5 mm Metal-Seat Press-In Check ValveValves that limit reverse flow through a liquid path.Configuration detailsOfficial The Lee Company product page for the 6.5 mm Press-In Check Valve, opened 18 November 2026, lists a press-in cartridge for plastic housings: diameter 6.60 mm, 75 Lohms, metal-to-metal seat, and official materials 303 stainless body, 305 stainless cage, 302 stainless spring and 440C stainless ball. Official working pressure is dependent on housing material, configuration and operating conditions. Official leakage wording is 20 SCCM max. at 172 kPa (25 psid) on air; that is manufacturer test wording, not a YOCOOLING guarantee. Official part numbers on that page are configuration options, not a stock list. Send the official part number, housing plastic and quantity to enquire. Official source: https://www.theleeco.com/product/6-5-mm-press-in-check-valve/ | ||
The Lee Company558 LC High-Flow Press-In Check ValveValves that limit reverse flow through a liquid path.Configuration detailsOfficial The Lee Company product page for the 5.5 mm Press-In LC Check Valve, opened 18 November 2026, lists a press-in cartridge for plastic housings: diameter 5.46 mm, 140 Lohms, metal-to-metal seat, and official materials 303 stainless body, 305 stainless cage, 302 stainless spring and 440C stainless ball. Official working pressure is dependent on housing material, configuration and operating conditions. The official data-center catalog describes this product as offering higher flow than standard 558 Series valves. It is not the metal-manifold 558 LC insert documented in official PDS-176 (150 Lohms, installation into metal); those official figures were not applied to this page. The live URL still contains “558-lc” and was not changed. Official part numbers on the 5.5 mm Press-In LC page are configuration options, not a stock list. Send the official part number, housing plastic and quantity to enquire. Official source: https://www.theleeco.com/product/5-5-mm-press-in-lc-check-valve/ | ||
The Lee Company8 mm Elastomer-Seat Metal-Insert Check ValveValves that limit reverse flow through a liquid path.Configuration detailsOfficial The Lee Company product page for the 8 mm Insert Zero Leak Check Valve, opened 18 November 2026, lists a threadless cartridge for installation into metal: diameter 7.95 mm, 250 Lohms, elastomeric seat, official valve flow direction Reverse Flow, and maximum working pressure differential 400 bar in the checked direction and 40 bar in the flow direction. Official materials: 303 stainless body, 416 stainless cage and pin, 302 stainless spring, 440C stainless ball, and EPDM or FKM seals. Official leakage wording is “Zero drops/minute on hydraulic fluid. Verified on air (0.05 SCCM maximum at 150 kPa)”; that is manufacturer test wording, not a YOCOOLING leakage guarantee. Official part numbers (CZRM8001… FKM and CZRM8002… EPDM families) are configuration options, not a YOCOOLING stock list. Send the official part number, cracking pressure, seal, housing material and quantity to enquire. This page is not a stock, price or warranty statement. Official source: https://www.theleeco.com/product/8-mm-insert-zero-leak-check-valve/ |
The Lee Company 832 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
The Lee Company832 Side-Exit Metal-Insert Check ValveValves that limit reverse flow through a liquid path.Manufacturer series: 832Configuration detailsOfficial The Lee Company product page for the 8 mm Insert Side Exit Check Valve, opened 18 November 2026, lists a threadless metal-insert cartridge: diameter 7.95 mm, metal-to-metal seat, official Lohm rate 65 Lohms in the forward configuration and 55 Lohms in the reverse configuration, and maximum working pressure differential 280 bar in the checked direction. Official materials: 303 stainless upper and lower bodies, 416 stainless pin, 302 stainless spring and 440C stainless ball. Official part-number families on that page include CCFM832… (forward, 65 Lohms) and CCRM832… (reverse, 55 Lohms); those official rows are configuration options, not a YOCOOLING stock list. The live URL still contains “832” and was not changed. Send the official part number, flow direction, housing and quantity to enquire. Official source: https://www.theleeco.com/product/8-mm-insert-side-exit-check-valve/ |
FITOK CA 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
FITOKCA Adjustable-Cracking Check ValveOfficial FITOK Check Valves catalog was opened 18 November 2026 for the CA adjustable-cracking series.Manufacturer series: CAConfiguration detailsThis remains a series reference: the opening setting belongs to the selected spring/code and must be confirmed at commissioning. Send the complete official order code and required setting to enquire. This page is not a stock list. |
FITOK CH 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
FITOKCH Floating-Seal Fixed-Cracking Check ValveOfficial FITOK Check Valves catalog was opened 18 November 2026 for the CH floating-seal fixed-cracking series.Manufacturer series: CHConfiguration detailsThis remains a series reference. Send the complete official order code, tube-end size and fluid to enquire. This page is not a stock list. |
FITOK CL 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
FITOKCL Union-Bonnet Stainless Check ValveOfficial FITOK Check Valves catalog was opened 18 November 2026 for the CL union-bonnet series.Manufacturer series: CLConfiguration detailsThis remains a series reference. The official catalog is the place to confirm installation orientation and whether an opening-pressure option is stated for the selected code. Send the complete official order code and end size to enquire. This page is not a stock list. |
FITOK CO 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
FITOKCO Compact Fixed-Cracking Check ValveOfficial FITOK Check Valves catalog was opened 18 November 2026 for the CO compact fixed-cracking series.Manufacturer series: COConfiguration detailsThis remains a series reference: both ends, body, seal and cracking-pressure code must be fixed by a complete official order code. Send that code, flow direction and fluid to enquire. This page is not a stock list. |
Fluid Components & Assemblies
Configurations 3 products
| Compare | Product / configuration | Quote |
|---|---|---|
XindaaitechIntegrated Cold-Plate, Manifold & Tube CircuitOfficial Xinda Technology page opened 18 November 2026 describes a direct liquid-cooling circuit of vacuum-brazed copper plates with customizable dimensions.Configuration detailsThis page remains a integrated cold-plate, manifold and tube circuit, not a fixed envelope or heat-load value. Send a controlled drawing and port details to enquire. This page is not a stock list. | ||
XindaaitechFour-Copper-Plate Server CPU Cooling AssemblyFluid components and assemblies built around specified drawing interfaces.Configuration detailsOfficial Xinda Technology page opened 18 November 2026 describes a custom vacuum-brazed copper CPU liquid-cooling circuit, with dimensions customizable and 100% thermal testing stated as a manufacturer quality-control wording. This page remains a four-copper-plate assembly reference, not a fixed size or validated duty. Send a controlled drawing and connection details to enquire. This page is not a stock list. | ||
XindaaitechMixed-Metal Three-Plate Server Cooling AssemblyFluid components and assemblies built around specified drawing interfaces.Configuration detailsOfficial Xinda Technology page opened 18 November 2026 describes a server liquid-cooling assembly of two aluminum cold plates, one copper cold plate, and tubing joined by vacuum brazing, with dimensions customizable. That official description matches this mixed-metal three-plate layout as a assembly, not a fixed stock size or heat-load rating. Send a controlled drawing, bill of materials and connection details to enquire. This page is not a stock list. |
Hose & Hose Assemblies
Finished hose assemblies 2 products
| Compare | Product / configuration | Quote |
|---|---|---|
V-ZENEPDM Sanitary-Clamp Hose AssemblyOfficial V-ZEN (威真液压流体设备) product page “EPDM服务器液冷软管” (opened 18 November 2026) lists model 202AA in sizes 1"–10".Configuration detailsOfficial wording describes an imported Alfagomma EPDM suction/discharge hose for coolant, purified water, deionized water and air, and states that the company can provide cooling-connection solutions for servers and data-center liquid-cooling systems. Official construction: EPDM inner tube, two layers of high-strength fiber with an embedded helical steel wire to resist collapse, and an EPDM cover. Official working temperature −40 °C to +100 °C (−22 °F to +212 °F). Official safety-factor wording is 3:1 for ≤127 mm and 2.5:1 for ≥152 mm — that is manufacturer wording, not a YOCOOLING rating. Official matching-fitting options include clamp-style flanges (卡盘式法兰), national-standard flanges, metric, imperial and US threads, pipe and taper threads, and 74°, 60° or 24° cone seals; those are official options, not a named sanitary-clamp standard or a unique finished-assembly part number. Official 223AA is a related Alfagomma water-hose code on the same page and is not treated as the same model. A working-pressure figure is not stated on today’s official V-ZEN page, so no hose-stock bar rating is assigned here. Finished-assembly pressure, clamp size and end-fitting alloy remain drawing-defined. Official source: https://www.v-zen.cn/products/jiaoguanzongcheng/2022-09-09/108.html These are manufacturer-published facts from official documents opened on 18 November 2026, not a YOCOOLING stock, price, lead-time, certification, interchange or warranty statement. To enquire, send the official V-ZEN model 202AA, the required bore, cut length, and the clamp or thread standard at each end from Request a Quote or Contact. This page does not list stock, price or lead time. | ||
nVent HOFFMANRCH12001 RackChiller Manifold Hose KitRCH12001 is a nVent HOFFMAN RackChiller manifold hose connection kit.Manufacturer part number: RCH12001 Manufacturer part number: RCH12001Hose assemblyConfiguration detailsThe existing listing documents a 12 in (305 mm), connection-to-connection assembly with NSP06 barbed sockets at both ends. The official nVent HOFFMAN catalog page opened 18 November 2026 titles this connection kit as NSP06 to NSP06, 12 in, black, SS304, for liquid flow between a standard configuration manifold and IT equipment (bulletin DCHL). Send the part number RCH12001, quantity and the required end connections to enquire. This page is not a stock list. |
Hose stock — CEJN 900 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
CEJN900 Peroxide-Cured EPDM Liquid Cooling Hose StockUnterminated, peroxide-cured EPDM coolant hose for cut-to-length use.Manufacturer series: 900Configuration detailsChoose the stock code and bore before specifying end fittings. The hose rating does not establish a finished assembly rating. |
Hose configurations — FITOK HMF 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
FITOKHMF Formable Corrugated Metal HoseOfficial FITOK HMF series category and Hoses and Connectors catalog were opened 18 November 2026.Manufacturer series: HMFConfiguration detailsThis remains a formable corrugated metal-hose series reference: select hose size, end type and overall length from the official ordering chart. The order example already on this page is a manufacturer example, not a decoded stock item. Send a complete official order code, end connections and length to enquire. |
Rack Manifolds & Distribution Assemblies
Configurations 6 products
| Compare | Product / configuration | Quote |
|---|---|---|
KUNGFLEXStainless Supply-and-Return Rack Manifold PairPorted bodies and assemblies that distribute supply or return liquid.Configuration detailsOfficial KUNGFLEX English liquid-cooled-manifold page, opened 18 November 2026, describes a complete set that includes a supply manifold and a return manifold for data-center rack cold-plate liquid-cooling systems, also mentioned for energy-storage and industrial cooling scenarios. Official construction wording: made entirely of 304/316 stainless steel using one-piece welding, with a mirror-polished finish and smooth, burr-free inner walls. Official fluid wording lists deionized water and glycol. Official marketing phrases such as “leak-proof,” “stable pressure performance,” and “run reliably for a long time” are manufacturer wording, not a YOCOOLING tightness, pressure or service-life guarantee. Today’s official page does not list a numeric branch-port range, so a 2-to-24 port figure is not presented here as an official catalog row; the actual port count, ends and envelope remain drawing-defined. Send a drawing or port map, material grade (304 or 316), coolant and quantity to enquire. Official source: https://en.kungflex.com/?list=367 This page is not a stock, price or warranty statement. | ||
BEEHEWide Multi-Branch Server Node ManifoldPorted bodies and assemblies that distribute supply or return liquid.Configuration detailsOfficial BEEHE Inner manifold page opened 18 November 2026 lists the MGX platform column as 524.5 × 389.8 × 125.4 mm, net weight 9.5 kg, screw mounting, SUS304 body and SUS316 piping, 19+2 branches, branch interface MQD02+NVQD04, external interface NVQD08, pressure drop 56.8 kPa at 30 L/min, and a 10 bar pressure rating, stainless-steel natural finish. Those are manufacturer table values for that wide layout, not a confirmed stock item or a YOCOOLING test rating. Send the platform column, branch arrangement and connection details, preferably with a drawing, to enquire. | ||
BEEHEFive-Branch Server Node ManifoldPorted bodies and assemblies that distribute supply or return liquid.Configuration detailsOfficial BEEHE Inner manifold page opened 18 November 2026 lists the Rubin platform column as 432.8 × 139 × 41.8 mm, net weight 6.1 kg, screw mounting, SUS304 body and SUS316 piping, five branches, branch interface NVQDB04, external interface NVQD08, pressure drop 40 kPa at 18 L/min, and a 10 bar pressure rating, nickel plated. Those are manufacturer table values, not a confirmed stock item or a YOCOOLING test rating. Send the platform column, branch count and connection details, preferably with a drawing, to enquire. | ||
BEEHECompact Dual-Branch Server Node Distribution AssemblyPorted bodies and assemblies that distribute supply or return liquid.Configuration detailsOfficial BEEHE Inner manifold page opened 18 November 2026 lists the GB200 platform column as 431.6 × 64.5 × 30.2 mm, net weight 2.6 kg, screw mounting, SUS304 body and SUS316 piping, two branches, branch interface NVQD04, external interface NVQD04, pressure drop 20 kPa at 6.5 L/min, and a 10 bar pressure rating, stainless-steel natural finish. Those are manufacturer table values for that platform column, not a confirmed stock item or a YOCOOLING test rating. Interface names are designations only. Send the platform column, branch count and connection details, preferably with a drawing, to enquire. | ||
nVent HOFFMANRCM42001H Rack Manifold with Hose WhipsA RackChiller rack manifold cataloged on this page as RCM42001H.Configuration detailsThe official nVent HOFFMAN product page opened 18 November 2026 (URL slug encrcm42001h) is titled “RackChiller Rack Manifold, Jet Black, Stainless Steel, Hose Whip” and describes a hose-whip configuration that connects directly to cold-plate equipment with hose-whips attached to the manifold. Official features quoted from that page include Parker NSP-06 quick disconnects on standard manifolds, an Eaton FD-83 supply/return ball-valve connector, and 1.50 x 1.50 in (38 mm x 38 mm) extruded stainless steel construction (bulletin DCHL). The retrieved official page did not present a visible RCM42001H order-code table. Send the part number RCM42001H, rack height and connection details to enquire. This page is not a stock list. | ||
GF Piping SystemsPVDF In-Rack Liquid Cooling ManifoldOfficial Georg Fischer Piping Systems In-Rack Manifold fact sheet, opened 18 November 2026, describes a custom-PVDF manifold for direct liquid cooling.Configuration detailsOfficial technical data: pressure rating PN10; material PVDF; colour opaque; temperature range −20 °C to 80 °C (−4 °F to 176 °F); official flammability standard UL 94 V-0 (manufacturer wording, not a YOCOOLING certification); inner surface Ra < 0.5 μm (20 μin) for injection-moulded and extruded components; capped ports; configuration top or bottom feed; options include dimension, length, ports and quick disconnects, with optional air bleeder, draining or special ports. Official quality-control wording: 100% pressure tested with water before shipment; official “system lifetime 25 years” is manufacturer wording, not a YOCOOLING warranty. The official illustration of a 132 kW, 48U, 48-outlet example at about 6 L/min per outlet with PG25 is a manufacturer design example, not this page’s configuration and not a YOCOOLING performance guarantee. The fact sheet states that its technical data are not binding unless confirmed in writing and do not constitute warranted characteristics; that is manufacturer wording. Send the required rack geometry, port map, connections and quantity to enquire. Official source: https://www.gfps.com/content/dam/gfps/com/brochures-and-flyers/en/gfps-datasheet-in-rack-manifold-en.pdf This page is not a stock, price or warranty statement. |
SMC PF3W Manifolds 4 products
| Compare | Product / configuration | Quote |
|---|---|---|
SMCPF3WB Basic Integrated Water Flow-Switch ManifoldOfficial SMC PF3WB/C/S/R catalog opened 18 November 2026 describes PF3WB as the integrated-type basic water-flow-switch manifold.Manufacturer series: PF3WBConfiguration detailsStation count, branch flow-range symbol, main piping thread and supply/return unit options are selected on the official how-to-order chart (rated flow ranges 0.5 to 4, 2 to 16 and 5 to 40 L/min; port sizes depend on the selected flow range). This page is a series reference, not one finished manifold in stock. Send a complete official order code, station count and fluid to enquire. | ||
SMCPF3WC Straight Integrated Water Flow-Switch ManifoldOfficial SMC PF3WB/C/S/R catalog opened 18 November 2026 describes PF3WC as the integrated-type straight water-flow-switch manifold, a different layout from PF3WB.Manufacturer series: PF3WCConfiguration detailsStation count, flow-range symbol and piping options are selected on the official how-to-order chart. Send a complete official order code to enquire. This page is not a stock list. | ||
SMCPF3WR Remote Return Flow-Switch ManifoldOfficial SMC PF3WB/C/S/R catalog opened 18 November 2026 describes PF3WR as the remote-type return flow-switch manifold.Manufacturer series: PF3WRConfiguration detailsIt is the return side of a separated PF3WS/PF3WR arrangement. Send a complete official order code and the matching supply-side code if required to enquire. This page is not a stock list. | ||
SMCPF3WS Remote Supply Water ManifoldOfficial SMC PF3WB/C/S/R catalog opened 18 November 2026 describes PF3WS as the remote-type supply water manifold.Manufacturer series: PF3WSConfiguration detailsIt is the supply side of a separated PF3WS/PF3WR arrangement, not a complete two-sided assembly by itself. Send a complete official order code and the matching return-side code if required to enquire. This page is not a stock list. |
Quick Disconnect Couplings
Configurations 2 products
| Compare | Product / configuration | Quote |
|---|---|---|
CEJNStainless Threaded or Ferrule-End Quick CouplingCouplings for connecting and disconnecting two fluid-line halves.Configuration detailsOfficial CEJN ultraFLOW SC product page opened 18 November 2026 describes a stainless-steel dry-break quick-coupling family with threaded or double-ferrule tube-fitting ends, series technical data of 5, 10 and 12 mm nominal flow diameter, 10–20 bar maximum working pressure, and main material stainless steel / stainless steel (AISI 316). An exact current order code is not printed on that page snapshot, so this record stays a series reference. Send the exact official order code, end-connection type, quantity and coolant details to enquire. This page is not a stock list. | ||
CEJNSeries 267 Non-Drip Quick Coupling Example 10 267 1220 / 10 267 6220Couplings for connecting and disconnecting two fluid-line halves.Configuration detailsOfficial CEJN Thermal Control brochure opened 18 November 2026 lists coupling 10 267 1220 and nipple 10 267 6220 as a Series 267 nickel-plated-brass Non-Drip example: G 1/4" (BSP), green code, EPDM seal. Series 267 technical data in that brochure include 4 mm (5/32") nominal flow diameter, 20 bar (290 PSI) maximum working pressure, 80 bar (1160 PSI) minimum burst pressure, and -20°C to +150°C temperature range for the nickel-plated-brass series. The stainless-steel AISI 316 counterpart in the same brochure is Series 277 (example 10 277 1220 / 10 277 6220), which is a different series and is not this example pair. The historic URL slug on this page contains the word stainless; it does not change the official material of 10 267 1220 / 10 267 6220. Send both exact part numbers, material series, quantity and port details to enquire. This page is not a stock list. |
Envicool CGQ 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
EnvicoolCGQ Semi-Automatic Ball-Locking Quick DisconnectCouplings for connecting and disconnecting two fluid-line halves.Manufacturer series: CGQConfiguration detailsOfficial Envicool “Liquid Cooling Quick Disconnect” datasheet, opened 18 November 2026, describes the CGQ series as a flat-face, steel-ball locking, direct-insertion coupling, with official color identification (inlet blue/KB, return red/KR). Official technical performance includes working temperature −55 °C to +120 °C, working pressure 0 to 100 psi, shell material SUS316L/EPDM, sealing-ring options EPDM and FVMQ, and official endurance 5000 mating cycles. Those official CGQ temperature limits are not the MQD/MQDB −40 to 110 °C row and are not mixed here. Official product codes and size-specific flow rows on that datasheet are configuration examples, not a YOCOOLING stock list. Send the official product code, ends, coolant and quantity to enquire. Official source: https://en.envicool.com/upload/file/20250928/1759043053359138.pdf |
Envicool CGS 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
EnvicoolCGS Clamp-Retained Quick DisconnectCouplings for connecting and disconnecting two fluid-line halves.Manufacturer series: CGSConfiguration detailsOfficial Envicool “Liquid Cooling Quick Disconnect” datasheet, opened 18 November 2026, describes the CGS series as a flat-face, clamp-fastened, push-to-lock coupling, with official color identification (inlet blue/KB, return red/KR) and official wording that the clamp-fastened design enables anti-vibration and anti-release in extreme vibration conditions; that is manufacturer wording, not a YOCOOLING vibration certification. Official technical performance includes working temperature −55 °C to +120 °C, working pressure 0 to 100 psi, and official endurance 5000 mating cycles. Official product codes are configuration examples, not a stock list. Send the official product code, clamp end, coolant and quantity to enquire. Official source: https://en.envicool.com/upload/file/20250928/1759043053359138.pdf |
CEJN LQC G1 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
CEJNLQC G1 Screw-to-Connect Quick Coupling Socket & Plug ConfigurationCouplings for connecting and disconnecting two fluid-line halves.Manufacturer series: LQC G1Configuration detailsOfficial CEJN sources opened 18 November 2026 list socket 10 153 1290 and nipple 10 153 6290 as LQC couplings (sockets) / nipples (plugs) with EPDM seals, 19 mm nominal flow diameter, G 1” connections, 12 bar (174 PSI) maximum working pressure and 48 bar (696 PSI) minimum burst pressure. The official Series 153 OCP LQC flow chart records both ends as G 1” (BSPP) female, remark v2. The official LQC product page lists series main material stainless steel (AISI 303). Colour is not filled in on those two brochure rows. Send both exact part numbers, quantity and the installed thread and coolant details to enquire. This page is not a stock list or an interchange statement. |
Envicool MQD 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
EnvicoolMQD Steel-Pin Locking Quick DisconnectOfficial Envicool “Liquid Cooling Quick Disconnect” datasheet, opened 18 November 2026, describes the MQD series as a flat-face, steel-pin locking, direct-insertion coupling.Manufacturer series: MQDConfiguration detailsOfficial technical performance includes working temperature −40 to 110 °C, working pressure 0 to 100 psi, shell material SUS316L/EPDM, sealing-ring options EPDM and FVMQ, mechanical endurance 5000 mating cycles, and coolants listed as deionized water, ethylene glycol solution, propylene glycol solution and similar. Official recommended flow rates, under the stated test conditions (plug to socket, 20 °C, pure water, 5 m/s velocity criterion), are MQD02 2.1 L/min, MQD03 4.6 L/min, MQD04 8.5 L/min and MQD04 MINI 8.5 L/min. Official “Designed for NVIDIA MGX™ architecture” is manufacturer wording, not a YOCOOLING authorization, qualification or interchange claim. Official product codes on that datasheet are configuration examples, not a YOCOOLING stock list. Send the official product code, socket and plug ends, coolant and quantity to enquire. Official source: https://en.envicool.com/upload/file/20250928/1759043053359138.pdf |
FITOK QP8 2 products
| Compare | Product / configuration | Quote |
|---|---|---|
FITOKFlat-Face QP8 Coupler BodyCouplings for connecting and disconnecting two fluid-line halves.Manufacturer part number: SS-QP8-NS8-BConfiguration detailsOfficial FITOK product page opened 18 November 2026 lists SS-QP8-NS8-B as a 316 stainless steel QP series flat-face quick-connect body with a 1/2 in. male NPT end, 290 psig (20 bar), –4°F to 392°F (–20°C to 200°C), Cv 0.9, and a fluorocarbon FKM O-ring. Those ratings are for this body part number; they are not automatically the ratings of a mating stem with a different seal. Send this exact official part number, quantity and the mating stem details to enquire. This page is not a stock list or an interchange statement. | ||
FITOKBulkhead QP8 Flat-Face StemCouplings for connecting and disconnecting two fluid-line halves.Manufacturer part number: SS-QP8-BFL6-D-EConfiguration detailsOfficial FITOK product page opened 18 November 2026 lists SS-QP8-BFL6-D-E as a 316 stainless steel QP series flat-face quick-connect stem with a 3/8 in. bulkhead tube fitting, 290 psig (20 bar), –40°F to 300°F (–40°C to 148°C), Cv 0.9, and an EPDM O-ring. The official temperature range on this stem differs from the FKM body SS-QP8-NS8-B; do not assume one combined temperature or seal for a mixed pair. Send this exact official part number, the mating body code and quantity to enquire. This page is not a stock list or an interchange statement. |
Universal Quick Disconnects (UQD)
Configurations 2 products
| Compare | Product / configuration | Quote |
|---|---|---|
FITOKValved UQD02 Quick-Disconnect PlugQuick disconnect components identified by their documented UQD interface.Manufacturer part number: S4-UQD02-ST7-D-BLConfiguration detailsOfficial FITOK catalog page for S4-UQD02-ST7-D-BL, opened 18 November 2026, lists this as a 304 stainless steel UQD series valved plug with a 7/16-20 male SAE/MS straight thread, EPDM O-ring and blue coding. Send that exact order code, quantity and the mating socket details to enquire. This page is not a stock list or a claim that another UQD half will mate. | ||
FITOKS4-BL Valved UQD08 5/8 in Hose-Tail SocketQuick disconnect components identified by their documented UQD interface.Configuration detailsOfficial FITOK catalog page opened 18 November 2026 lists S4-UQD08-MP10-B-BL as a 304 stainless steel UQD series valved socket with a 5/8 in hose connector, EPDM O-ring and blue coding. The official UQD series catalog uses -UQD08-MP10-B as the basic socket ordering number for that 5/8 in hose end. If you need a different material or color suffix, say so. Send the exact full order code, quantity and hose details to enquire. This page is not a stock list. |
FITOK UQD02 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
| Manufacturer series: UQD02Socket & plug configuration |
CEJN UQD06 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
CEJNUQD06 Red Hand-Mate Quick Disconnect Socket & Plug ConfigurationA size-specific UQD06 socket and plug example using two CEJN part numbers, kept as separate ends rather than merged into a generic UQD specification.Manufacturer series: UQD06Configuration detailsOfficial CEJN flow chart 7187 (Series 153 UQD-06), opened 18 November 2026, lists coupling (socket) 10 153 1026 with a 1/2 in CEJN-Lock hose connection and nipple (plug) 10 153 6676 with a 3/4-16 UNF male ORB -08 connection. The official CEJN UQD series page lists a 10 bar maximum working pressure and AISI 303 stainless steel as the main material, with double EPDM seals described for the series. Send both part numbers, quantity and the required color/coding to enquire. This page is not a stock list or a claim that another manufacturer’s UQD half will mate. |
Blind-Mate Quick Disconnects
CEJN BMQC 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
CEJNBMQC Blind-Mate Quick Coupling Socket & Plug ConfigurationQuick disconnects for guided mating within equipment.Manufacturer series: BMQCConfiguration detailsOfficial CEJN sources opened 18 November 2026 list BMQC socket 10 153 1990 (UNF 3/4”-16 ORB) and nipple 10 153 6990 (3/8”) with EPDM seals, 5 mm nominal flow diameter, 3.45 bar (50 PSI) maximum working pressure and 13.8 bar (200 PSI) minimum burst pressure. The official BMQC product page lists series technical data of 5 mm, 3.45 bar and main material stainless steel (AISI 303), and states +/- 5 mm radial and +/- 2.7° angular misalignment tolerance as a series claim. Send both exact part numbers, quantity and the rack-side mounting and coolant details to enquire. This page is not a stock list or an interchange statement. |
Envicool CGB 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
EnvicoolCGB Floating Blind-Mate CouplingQuick disconnects for guided mating within equipment.Manufacturer series: CGBConfiguration detailsOfficial Envicool “Liquid Cooling Quick Disconnect” datasheet, opened 18 November 2026, describes the CGB series as a flat-face coupling with no locking mechanism, locked through an external fastener, and official wording that the correction capability can compensate for a maximum misalignment error of ±1.5 mm (this official CGB figure is not the MQDB ±1 mm figure). Official technical performance includes working temperature −55 °C to +120 °C, working pressure 0 to 100 psi, shell material SUS316L/EPDM, sealing-ring options EPDM and FVMQ, and official endurance 5000 mating cycles. Official product codes are configuration examples, not a stock list. Send the official product code, retention method, ends, coolant and quantity to enquire. Official source: https://en.envicool.com/upload/file/20250928/1759043053359138.pdf |
Envicool MQDB 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
EnvicoolMQDB Externally Retained Blind-Mate CouplingQuick disconnects for guided mating within equipment.Manufacturer series: MQDBConfiguration detailsOfficial Envicool “Liquid Cooling Quick Disconnect” datasheet, opened 18 November 2026, describes the MQDB series as a flat-face coupling with no locking mechanism, locked through an external fastener, and official wording that the correction capability can compensate for a maximum misalignment error of ±1 mm. Official technical performance includes working temperature −40 to 110 °C, working pressure 0 to 100 psi, shell material SUS316L/EPDM, sealing-ring options EPDM and FVMQ, and official endurance 5000 mating cycles. Official recommended flows under the stated test conditions are MQDB02 2.1 L/min, MQDB03 4.6 L/min, MQDB04 8.5 L/min and MQDB04 MINI 8.5 L/min. Official “Designed for NVIDIA MGX™ architecture” is manufacturer wording, not a YOCOOLING authorization, qualification or interchange claim. Official product codes are configuration examples, not a stock list. Send the official product code, retention method, ends, coolant and quantity to enquire. Official source: https://en.envicool.com/upload/file/20250928/1759043053359138.pdf |
CEJN UQDB08 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
CEJNUQDB08 Guided Blind-Mate Coupling Socket & Plug ConfigurationA documented UQDB08 socket-and-plug example with separate CEJN order codes 10 153 1928 and 10 153 6928 already recorded on this page.Manufacturer series: UQDB08Configuration detailsThe official CEJN UQDB series page opened 18 November 2026 lists series technical data of 10 bar maximum working pressure and AISI 303 stainless steel; it did not present those two order codes in the retrieved table. Send both part numbers, quantity and the guided-mount details to enquire. This page is not a stock list or a mating certification. |
Fittings & Adapters
Configurations 12 products
| Compare | Product / configuration | Quote |
|---|---|---|
DanfossFF4514-2024-568 90° Swivel Hose-to-Rack Manifold AdapterFittings and adapters joining tube, hose or threaded interfaces.Configuration detailsOfficial Danfoss PowerSource page for catalog item FF4514-2024-568 (item 12025953), opened 18 November 2026, lists a 90 Degree adapter-elbow in 304 stainless steel: end 1 is male 1179-2 BSPP type E (light duty) G 1 1/4-11 (-20), end 2 is male barb -24, seal material ethylene propylene (EPDM) with special requirement EPR, working pressure 10 bar / 145.00 PSI, working temperature 3 to 65 °C, drop dimension 104.50 mm, and hex sizes 65.000 mm and 70.000 mm. The official item type is Adapter-elbow; the earlier “swivel” wording on this listing is not used on that official table, so this page no longer presents the part as a swivel. Today’s official PowerSource table does not list proof or burst pressure for this catalog item; those figures are not added or confirmed here. Send the exact official catalog item FF4514-2024-568, the mating hose and port, coolant and quantity to enquire. This page is not a stock, price, lead-time or warranty statement. | ||
FITOK1/2 × 1/4 in. Reducing Tube UnionFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: SS-U-FL8-FL4Configuration detailsOfficial FITOK product page opened 18 November 2026 lists SS-U-FL8-FL4 as a 316 stainless steel 6D-series straight reducing tube fitting with a 1/2 in. tube-fitting port and a 1/4 in. tube-fitting port. Send that exact part number, both tube sizes and quantity to enquire. This page is not a stock list. | ||
FITOK1/2 × 1/4 × 1/2 in. Reducing TeeOfficial FITOK product page opened 18 November 2026 lists SS-TTT-FL8-FL4-FL8 as a 316 stainless steel 6D-series tee with tube-fitting ports of 1/2 in., 1/4 in. and 1/2 in.Manufacturer model: SS-TTT-FL8-FL4-FL8Configuration detailsSend that exact part number, branch orientation and quantity to enquire. This page is not a stock list. | ||
FITOK1/2 in. Twin-Ferrule Straight UnionOfficial FITOK product page opened 18 November 2026 lists SS-U-FL8 as a 316 stainless steel 6D-series straight tube fitting with 1/2 in. tube-fitting ports on both ends.Manufacturer model: SS-U-FL8Configuration detailsSend that exact part number, tubing specification and quantity to enquire. This page is not a stock list or a pressure rating for an assembled joint. | ||
AODSONWeld-On Saddle Threaded Branch OutletFittings and adapters joining tube, hose or threaded interfaces.Configuration detailsOfficial AODSON page for stainless-steel weld-on threaded outlets, opened 18 November 2026, describes a custom weld-on saddle threaded outlet, branch boss or threaded pipe socket with a concave saddle contour machined to match a specified host-pipe outside diameter. Official thread configuration is female internal or male external, with official thread-form options including NPT, BSP, BSPT, metric and UN, subject to drawing review. Official material wording: stainless grade is selected to the drawing and service; 304 and 316 are named as common options that can be evaluated, not a verified grade for A part. Host radius, weld procedure and finished-assembly acceptance remain drawing-defined. Official source: https://www.aodson.com/products/5134.html This page is not a stock, price or warranty statement. | ||
AODSONThree-Segment Hinged Sanitary Pipe ClampOfficial AODSON page for a duplex stainless three-segment sanitary pipe clamp, opened 18 November 2026, describes three hinged clamp segments with a threaded wing-nut closure.Configuration detailsOfficial material options are 2205 duplex or 2507 super-duplex stainless steel, with official selection wording that 2507 is described as offering higher pitting, crevice-corrosion and strength capability for more severe environments, subject to engineering review; that comparison is manufacturer wording, not a YOCOOLING corrosion guarantee. Official connection wording: for compatible sanitary ferrules and gaskets; ferrule profile must be confirmed before ordering. Official size wording: final clamp diameter follows the selected connection standard. Official service-limit wording: allowable pressure and temperature depend on clamp size, ferrule, gasket, material and the applicable piping standard, and the clamp alone does not define the completed-joint rating. Official source: https://www.aodson.com/products/5077.html This page is not a stock, price or warranty statement. | ||
AODSONTwo-Piece Hinged Sanitary Pipe ClampFittings and adapters joining tube, hose or threaded interfaces.Configuration detailsOfficial AODSON page for a 2205 duplex stainless two-piece sanitary quick-release clamp, opened 18 November 2026, describes a hinged ring with an adjustable threaded wing-nut closure. Official construction options are light, medium-duty thickened and heavy-duty thickened versions. Official connection wording: for compatible sanitary ferrules and gaskets; the ferrule profile and outside diameter must be confirmed. Official reference tube/ferrule OD option pairs include 38/50.5, 51/64, 63/77.5, 76/91, 89/106, 102/119, 133/145 and 159/183 mm, to be verified against the selected standard before ordering; these are official catalog options, not a stock list. Official service-limit wording: allowable pressure and temperature depend on clamp size, construction, ferrules, gasket, assembly and the governing piping standard, and the complete joint—not the clamp alone—determines safe limits. Official source: https://www.aodson.com/products/5087.html This page is not a stock, price or warranty statement. | ||
AODSONMale-Female 90° Stainless Street ElbowFittings and adapters joining tube, hose or threaded interfaces.Configuration detailsOfficial AODSON page for 304 stainless steel male-female street elbows, opened 18 November 2026, describes a 90° adapter with one female internal thread and one male external thread around a square wrenching body. Official material is 304 stainless steel as shown, with 316L and other grades subject to service review. Official thread-form options include G/BSPP, BSPT/R, NPT and metric. Official size wording notes a 1/4-inch marking shown, with additional nominal sizes produced to specification; that marking does not by itself establish the thread standard or a pressure rating. Ratings and tolerances are officially confirmed from the approved drawing, material, thread form, temperature and test requirements. Official source: https://www.aodson.com/products/5155.html This page is not a stock, price or warranty statement. | ||
AODSONForged Stainless Threaded Pipe CapOfficial AODSON page for 3000LB forged stainless steel threaded pipe caps, opened 18 November 2026, describes a forged female threaded cap with a closed end.Configuration detailsOfficial material options include 304 stainless as shown, with 316L and other grades subject to order review. Official pressure-class wording is “3000LB configuration shown,” with other classes subject to specification review; 3000LB is a fitting class designation, not a 3000 psi working-pressure claim. Official thread wording lists NPT as shown, with BSPT/Rc or other specified threads subject to drawing and standard confirmation. Nominal size, standard and allowable pressure remain specified to the approved drawing. Official source: https://www.aodson.com/products/5143.html This page is not a stock, price or warranty statement. | ||
AODSONInternal-Hex Flange Port Plug with SealFittings and adapters joining tube, hose or threaded interfaces.Configuration detailsOfficial AODSON page for stainless-steel hex-socket flange pipe plugs, opened 18 November 2026, describes a male-threaded flange plug with an internal hex socket and an elastomer sealing ring. Official thread options include metric, BSPP, BSPT, NPT or drawing-specific forms. Official wording states that seal performance depends on groove geometry, flange flatness, surface finish, mating-face condition, elastomer compound, compression, installation torque, fluid, temperature and pressure, and that those items should be specified together. Official source: https://www.aodson.com/products/5037.html This page is not a stock, price or warranty statement. | ||
AODSONExternal-Hex Male Threaded Port PlugOfficial AODSON page for stainless-steel hex-head pipe plugs, opened 18 November 2026, describes a solid male-threaded hex-head plug.Configuration detailsOfficial thread options include NPT, BSPT, BSPP, metric or drawing-specific tapered and parallel threads. Official sealing wording lists tapered-thread sealant, gasket, O-ring or a project-specific face seal as defined by the port design. The official page states that tapered and parallel pipe threads seal differently and must not be treated as interchangeable. Official source: https://www.aodson.com/products/5025.html This page is not a stock, price or warranty statement. | ||
AODSONExternal-Square Male Threaded Port PlugOfficial AODSON page for stainless-steel square-head pipe plugs, opened 18 November 2026, describes a male-threaded plug with an external square drive.Configuration detailsOfficial material wording includes stainless steel, including 304 when specified and verified, with other grades subject to application review. Official thread options include NPT, BSPT, BSPP, metric or drawing-specific forms. Official sealing options include taper-thread interference, sealing compound, tape, gasket or a project-specific arrangement. Official source: https://www.aodson.com/products/5031.html This page is not a stock, price or warranty statement. |
SMC KQG2 8 products
| Compare | Product / configuration | Quote |
|---|---|---|
SMCSUS316 Reducing Y-Tube UnionFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2U06-08Configuration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2U06-08 as a SUS316 different-diameter union Y between ø6 mm and ø8 mm tubing, with a catalog effective area of 13.4 mm² stated for FEP tube. Send that exact official model to enquire. This page is not a stock list. | ||
SMCSUS316 Panel-Mount Straight UnionFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2E06-00Configuration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2E06-00 as a SUS316 panel-mount (bulkhead) connector for ø6 mm tubing with an M14 × 1 mounting thread, and a catalog effective area of 13.1 mm² stated for FEP tube. Send that exact official model and panel details to enquire. This page is not a stock list. | ||
SMCSUS316 Extended Male ElbowFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2W06-02SConfiguration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2W06-02S as a SUS316 extended male elbow for ø6 mm tubing and R 1/4 thread, with a catalog effective area of 10.9 mm² stated for FEP tube. It is a different official row from the standard elbow KQG2L06-02S. Send the exact official model to enquire. This page is not a stock list. | ||
SMCSUS316 Straight Male Push-In FittingFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2H06-02SConfiguration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2H06-02S as a SUS316 male connector for ø6 mm tubing and R 1/4 thread, with a catalog effective area of 13.1 mm² stated for FEP tube. Send that exact official model, tube type and quantity to enquire. This page is not a stock list. | ||
SMCSUS316 Male Elbow Push-In FittingFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2L06-02SConfiguration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2L06-02S as a SUS316 male elbow for ø6 mm tubing and R 1/4 thread, with a catalog effective area of 11.4 mm² stated for FEP tube. Send that exact official model to enquire. This page is not a stock list. | ||
SMCSUS316 Reducing Straight UnionFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2H06-08Configuration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2H06-08 as a SUS316 reducing straight union between ø6 mm and ø8 mm tubing, with a catalog effective area of 13.1 mm² stated for FEP tube. Send that exact official model and both tube sizes to enquire. This page is not a stock list. | ||
SMCSUS316 Equal-Tube Tee UnionFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2T06-00Configuration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2T06-00 as a SUS316 equal-tube union tee with ø6 mm connections, and a catalog effective area of 13.4 mm² stated for FEP tube. This is a different official row from the threaded-branch tee KQG2T06-02S. Send the exact official model to enquire. This page is not a stock list. | ||
SMCSUS316 Male-Branch Tee FittingFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2T06-02SConfiguration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2T06-02S as a SUS316 male-branch tee for two ø6 mm tube connections and an R 1/4 male-thread branch, with a catalog effective area of 13.9 mm² stated for FEP tube. Send that exact official model to enquire. This page is not a stock list. |
Flow, Pressure & Temperature Sensors
Configurations 2 products
| Compare | Product / configuration | Quote |
|---|---|---|
SMCPF3W720-04-A Integrated Water Flow SensorOfficial SMC PF3W catalog PDF opened 18 November 2026 is the manufacturer source for the PF3W integrated-display water flow switch family.Configuration detailsThe existing order-code reading on this page (PF3W720-04-A) should still be confirmed against that current official how-to-order chart for port thread, output and options. Send the complete official part number, port thread and electrical details to enquire. This page is not a stock list. | ||
SMCPF3W504-03-1-Z Remote Water-Flow SensorOfficial SMC PF3W catalog PDF opened 18 November 2026 is the manufacturer source for the PF3W5 remote sensor family.Configuration detailsConfirm the complete official suffix, including thread form and output, from that current how-to-order chart. Send the complete official part number, port thread and output details to enquire. This page is not a stock list. |
Danfoss DST 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
| Manufacturer series: DSTComponent |
VOLKE FJP 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
| Manufacturer series: FJPComponent |
SMC PFG200 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
SMCPFG200 Four-Channel Flow MonitorComponents for measuring flow, pressure or temperature.Manufacturer series: PFG200Configuration detailsOfficial SMC English catalog CAT.ES100-157A (3-Screen Display 4-Channel Flow Monitor, PFG200 Series), opened 18 November 2026, describes a separate display/monitor to which up to four flow sensors can be connected. Official applicable sensor families listed on the catalog cover include PF2A, PF3W-Z, PF3W and PF2D; the sensing heads remain separate products, and the exact official input/output code still has to be selected. Official catalog specification tables include a 12 to 24 VDC power-supply rating and 0 to 50 °C operating temperature among the series rows; analogue output and the number of switch outputs vary by official configuration, so those I/O details are not assigned to this page without a complete official order code. Send the official PFG200 order code, the connected sensor part numbers, and quantity to enquire. This page is not a stock, price or lead-time statement. |
Tube Assemblies
Configurations 3 products
| Compare | Product / configuration | Quote |
|---|---|---|
AODSONCustom 304 Stainless CDU Flanged Pipe AssembliesFormed tubes and pipe assemblies for fixed liquid routes.Configuration detailsOfficial AODSON page for 304 stainless steel CDU cooling pipe assemblies, opened 18 November 2026, describes a custom CDU liquid-cooling pipe and loop assembly in 304 stainless steel, with formed straight and curved tube sections and welded and machined flange interfaces. Official configuration options include U-loops, return bends, offset spools, branches, manifold connections, equipment risers and custom routed assemblies. Official end-connection wording lists bolted flanges as shown, with sanitary, threaded, grooved, welded or project-specific interfaces available after review. Tube size, wall, pressure duty, cleanliness and inspection remain drawing-defined. Official inspection options include dimensional inspection, weld examination, pressure or leak testing, cleanliness verification and documentation packages; those are options, not a completed test record for A example. Send a drawing, material, ends, inspection scope and quantity to enquire. Official source: https://www.aodson.com/products/5092.html This page is not a stock, price or warranty statement. | ||
MFCFormed Stainless Y-Tube AssemblyFormed tubes and pipe assemblies for fixed liquid routes.Configuration detailsOfficial MFC Hose liquid-cooling assemblies page and March 2026 Data Center Cooling Solutions sell sheet, opened 18 November 2026, list stainless-steel formed-tube assemblies among MFC’s data-center fluid-conveyance products, including robotic CNC tube forming, one-piece bending described as intended to eliminate joining pipe fittings with clamps and leak points, and custom Y-assemblies and manifolds. That “eliminate leak points” wording is manufacturer capability wording, not a YOCOOLING tightness or leak-test guarantee. Official ISO-certified wording on the sell sheet is manufacturer wording, not a YOCOOLING certification. The official formed-tube brochure also lists custom CNC bending, custom end-fitting configurations, custom flaring/parflange, and pipe and tube welding and brazing as capabilities; those are family capabilities, not an identification of this Y-assembly’s grade, ends, joints, dimensions or pressure rating. Official “100% leak tested,” UL 94 V-0 and hydrostatic 40,000 PSI figures on the same sell sheet belong to other official product lines (corrugated metal hose, EPDM hose, or test capability) and are not assigned to this formed Y-tube. Send a controlled drawing, material grade, end preparation and quantity to enquire. Official sources: https://mfchose.com/product/liquid-cooling-assemblies and https://mfchose.com/wp-content/uploads/2026/03/MFC_DataCenters_SellSheet_Mar2026_F.pdf This page is not a stock, price or warranty statement. | ||
DeyaFormed System-Pipe Module with Flexible BranchesFormed tubes and pipe assemblies for fixed liquid routes.Configuration detailsOfficial Changzhou Deya (德亚, deyacz.com) stainless header and system-pipe page, opened 18 November 2026, describes custom stainless fluid-distribution and collection components produced from an approved drawing or sample, using precision welding and CNC machining, with official mention of data-center liquid-cooling among the intended applications. Official quality and “meets standard” wording is manufacturer wording, not a YOCOOLING dimensional, tightness or cleanliness guarantee. Today’s official page does not describe the combination of a curved rigid main tube with short braided flexible branches, so that geometry, the visible mixed ends and the mounting tab remain rather than official catalog dimensions. Send a drawing, material, end connections, inspection scope and quantity to enquire. Official source: https://www.deyacz.com/bxgldjg.html This page is not a stock, price or warranty statement. |
Filters & Strainers
Configurations 7 products
| Compare | Product / configuration | Quote |
|---|---|---|
FITOKReplaceable-Element Tee-Body Inline FilterA tee-body filter with a replaceable element for inline fluid filtration.Configuration detailsChoose the body material, element type and nominal pore grade for the required configuration. | ||
The Lee CompanyBR Locking-End Metal Safety ScreenFilter elements and housings that capture particles in liquid.Configuration detailsOfficial The Lee Company product page for the 12 mm BR Series Safety Screen Filter, opened 18 November 2026, lists a BR Series screen for installation into metal: part diameter 11.93 mm, micron rating 40 to 170 microns, screenable passageway diameter as large as 9.60 mm, woven wire mesh, bidirectional flow, and official Lohm rate as low as 22 Lohms. Official materials: 305 stainless body, 303 stainless pintal, and 316 stainless screen. Official minimum burst pressure 24 MPa is stated for a fully clogged safety screen filter; that is manufacturer wording, not a YOCOOLING burst or system rating. Official part numbers on that page are configuration options, not a stock list. Send the official part number, micron rating and housing details to enquire. Official source: https://www.theleeco.com/product/12-mm-br-series-safety-screen-filter/ | ||
The Lee CompanyFine-Grade Micro Press-In Safety ScreenFilter elements and housings that capture particles in liquid.Configuration detailsOfficial The Lee Company product page for the 2.5 mm Press-In Safety Screen, opened 18 November 2026, lists a woven-wire screen for direct installation into plastic housings or fittings: part diameter 2.54 mm, micron rating 4 to 40 microns, screenable passageway diameter 2.36 mm, bidirectional flow, and official Lohm rate as low as 850 Lohms. Official materials: 303 stainless body and 316 stainless screen. Official working pressure is dependent on housing material, configuration and operating conditions. Official part numbers on that page are configuration options, not a stock list. Send the official part number, micron rating and housing plastic to enquire. Official source: https://www.theleeco.com/product/2-5-mm-press-in-safety-screen/ | ||
The Lee CompanyCustomer-Retained Cartridge Safety ScreenFilter elements and housings that capture particles in liquid.Configuration detailsOfficial The Lee Company product page for the 10.0 mm Cartridge Safety Screen, opened 18 November 2026, lists a woven-wire cartridge designed to be placed in a flat-bottom hole and retained by a secondary means: mounting configuration Cartridge – Customer Retained, part diameter 9.93 mm, micron rating 40 to 300 microns, screenable passageway diameter as large as 7.56 mm, bidirectional flow, and official Lohm rate as low as 35 Lohms. Official materials: 305 stainless body, 17-7 stainless pintal, and 316 stainless screen. Official minimum burst pressure 24 MPa is stated for a fully clogged safety screen filter; that is manufacturer wording, not a YOCOOLING burst or system rating. Official part numbers on that page are configuration options, not a stock list. Send the official part number, micron rating and retention details to enquire. Official source: https://www.theleeco.com/product/10-0-mm-cartridge-safety-screen/ | ||
The Lee CompanyMetal-Housing Locking Insert Safety ScreenFilter elements and housings that capture particles in liquid.Configuration detailsOfficial The Lee Company product page for the 10.0 mm Insert Safety Screen, opened 18 November 2026, lists a woven-wire insert for installation into metal: part diameter 10.00 mm, micron rating 40 to 170 microns, screenable passageway diameter 9.0 mm, official flow direction Forward Flow, and official Lohm rate as low as 40 Lohms. Official materials: 303 stainless body, 416 stainless pin, and 316 stainless screen. Official part numbers on that page are configuration options, not a stock list. This official insert product is distinct from the 10.0 mm customer-retained cartridge (9.93 mm). Send the official part number, micron rating and housing details to enquire. Official source: https://www.theleeco.com/product/10-0-mm-insert-safety-screen/ | ||
The Lee CompanyPlastic-Housing Press-In Safety ScreenFilter elements and housings that capture particles in liquid.Configuration detailsOfficial The Lee Company product page for the 8.0 mm Press-In Safety Screen, opened 18 November 2026, lists a woven-wire screen for direct installation into plastic housings or fittings: part diameter 7.92 mm, micron rating 40 to 170 microns, screenable passageway diameter 7.82 mm, bidirectional flow, and official Lohm rate as low as 70 Lohms. Official materials: 303 stainless body and 316 stainless screen. Official working pressure is dependent on housing material, configuration and operating conditions. Official part numbers on that page are configuration options, not a stock list. Send the official part number, micron rating and housing plastic to enquire. Official source: https://www.theleeco.com/product/8-0-mm-press-in-safety-screen/ | ||
SMCFQ1011N-06-HX50 Quick-Change Liquid FilterAn exact quick-change filter configuration with SUS304 housing, Rc3/4 ports, NBR housing seal and a nominal 0.5 µm cotton-fiber element, as already read from the housing label.Configuration detailsOfficial SMC FQ1 catalog (E112), opened 18 November 2026, lists FQ1011 as the L250 single-element housing size, port size 06 as Rc 3/4, N as the NBR seal option, and HX50 as a cotton-fiber element with a 0.5 µm nominal rating. Send the complete order code FQ1011N-06-HX50, quantity and fluid details to enquire. This page is not a stock list. |
FITOK FB 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
FITOKFB Serviceable Bypass Line FilterA T-shaped FITOK FB bypass filter with two line ports and a lower element/service branch.Manufacturer series: FBConfiguration detailsPort size and pore grade depend on the selected configuration. Official Filters catalog opened 18 November 2026 includes the FB bypass filter series. Send the complete FB order code, element and seal details to enquire. This page is not a stock list. |
FITOK FH 3 products
| Compare | Product / configuration | Quote |
|---|---|---|
FITOKFH High-Capacity Bypass FilterA larger cylindrical FITOK FH high-capacity bypass filter.Manufacturer series: FHConfiguration detailsOfficial Filters catalog opened 18 November 2026 includes the FH high-flow, high dirt-holding bypass filter series; exact ports, seal and element must be ordered as a matched configuration. Send the complete FH order code, area designation and element type to enquire. This page is not a stock list. A longer element-specification checklist is in the replacement filter-element article. | ||
FITOKFH Sintered Metal-Mesh Filter ElementA removable rigid sintered-metal filter element shown separately in the FH catalogue.Manufacturer series: FHConfiguration detailsThe five-layer construction and surface appearance distinguish it from the pleated mesh version; exact grade and housing fit remain order-specific. | ||
FITOKFH Pleated Metal-Mesh Filter ElementFilter elements and housings that capture particles in liquid.Manufacturer series: FHConfiguration detailsOfficial FITOK English Filters catalog (Filters_EN.pdf), opened 18 November 2026, describes FH Series high flow, high dirt-holding bypass filters with 4H and 8H filtration-area types and an integrated wire-mesh filter element for disassembly, cleaning and maintenance. Official pages in that catalog show multi-layer pleated wire mesh and list the element type as Strainer. Official filtration areas are 10.70 in² (6908 mm²) for 4H and 71.50 in² (46128 mm²) for 8H. Official nominal pore sizes listed for strainer elements are 5, 25, 100, 150 and 250 µm, with 450 µm listed for 8H. Official catalog note: filter elements remove 95% of particles larger than the nominal pore size; that is manufacturer wording, not a YOCOOLING filtration guarantee. Official materials of construction in the FH series tables list the element as 316 SS; this page therefore does not treat 316L as the official catalog grade for the FH element. A complete official element and housing code, including 4H or 8H area and pore size, is still required to enquire. Official catalog rows are not a YOCOOLING stock list. Official sources: https://www.fitok.com/tmp/file/Filters_EN.pdf and https://www.fitok.com/en/product/category-182.html |
FITOK FI 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
FITOKFI Compact Inline Particulate FilterA compact inline filter with selectable body, element and connection options.Manufacturer series: FIConfiguration detailsChoose the body, element and filtration-area options for the required configuration. |
FITOK FW 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
FITOKFW All-Welded Inline Particulate FilterAn all-welded inline filter with a fixed element and opposed threaded ends.Manufacturer series: FWConfiguration detailsCheck the fixed-element back-flush conditions and the required end connections. |
Flow-Control Valves
Configurations 3 products
| Compare | Product / configuration | Quote |
|---|---|---|
The Lee CompanyMiniature Liquid Flow-Regulating InsertValves for adjusting flow through a liquid branch.Configuration detailsOfficial The Lee Company product page for the Flow Regulating Valve, opened 18 November 2026, describes a series for regulated liquid flow: official regulated flow-rate range 0.2 to 4 LPM, with official wording that rates outside this range are achievable upon request; official diameter range 5.5 mm to 12 mm; official mounting options DL Series into soft metal housings, press-in into plastic housings, and hose mount into EPDM or PTFE hoses. Official general performance also lists 40 bar maximum working pressure differential in the regulated flow direction, and a key-facts figure of 69 bar in aluminum. Official materials: 303 stainless body and cage, 302 stainless spring, and CDA 360 brass poppet. This page is a series reference; the exact official size, mount, flow setting and configuration must still be stated in a quote. Official figures are manufacturer ratings, not a YOCOOLING performance guarantee. Send the complete official configuration and quantity to enquire. Official source: https://www.theleeco.com/product/flow-regulating-valve/ | ||
FITOKManual Fine-Metering ValveOfficial FITOK Metering Valves catalog and metering-valve category were opened 18 November 2026.Configuration detailsThis remains a manual fine-metering valve series reference (straight or angle pattern). An exact complete order code is still required for body pattern, end type, stem and handle. Send that official ordering code, port size and the intended fluid to enquire. This page is not a stock list or a site-wide flow-capacity claim. | ||
SMCAutomatic Water Flow ControllerValves for adjusting flow through a liquid branch.Manufacturer part number: FC2W520-04-3-X110Configuration detailsOfficial SMC FC2W-X110 catalog (15-E663) opened 18 November 2026 lists FC2W520-04-3-X110 as a water flow controller: Karman-vortex detection, 2.0 to 16.0 L/min control range, 1.6 to 16.8 L/min measurement range, Rc 1/2 port, 3 m lead with connector, 0.2 to 0.4 MPa operating pressure at 0 to 50°C fluid temperature, 0.6 MPa withstand pressure, ±5% F.S. control accuracy, response 10 s or less, analogue voltage input 1 to 5 VDC, flow-rate pulse output, 24 VDC ±10%, and 530 g. Leakage when fully closed is 1 L/min or less; a shutoff function is not provided, and the catalog requires an external shutoff valve to stop flow in an emergency. Wetted materials listed: PPS, PP, POM, FKM, stainless steel 303, stainless steel 304, SCS13, non-grease. Applicable fluid is water; glycol compatibility is not inferred. Send the exact official part number and control-interface details to enquire. This page is not a stock list. |
Leak Detection Components
Configurations 5 products
| Compare | Product / configuration | Quote |
|---|---|---|
| Component | ||
XiangweiHelical Locating Leak-Sensing CableXW-ES2-10H1 is a helical leak-sensing cable for a compatible Xiangwei locating controller.Manufacturer model: XW-ES2-10H1 Manufacturer model: XW-ES2-10H1ComponentConfiguration detailsUse the complete model reference when requesting a replacement cable or parts for an existing installation. | ||
XiangweiOptical Spot Leak Sensor with Relay OutputXW-DC-01B is an optical spot-leak sensor with a dry-contact relay output.Manufacturer model: XW-DC-01B Manufacturer model: XW-DC-01BComponentConfiguration detailsInclude the complete model reference when requesting replacement sensors or a mixed maintenance parts list. | ||
| Manufacturer model: XW-DC-01AComponent | ||
XiangweiXW-PC-3 Locating Leak Detection ControllerXW-PC-3 is a locating leak-detection controller with RS485 and relay outputs for a matching sensing cable.Manufacturer model: XW-PC-3 Manufacturer model: XW-PC-3ComponentConfiguration detailsSource the controller by model for an existing installation or a component purchase. |
Raychem TT1000 1 product
| Compare | Product / configuration | Quote |
|---|---|---|
RaychemTT1000 Modular Water-Sensing CableCables, point sensors and controllers for detecting liquid leaks.Manufacturer series: TT1000Configuration detailsOfficial Raychem TraceTek TT1000 datasheet (RAYCHEMTraceTek-DS-H53870-TT1000-EN-2603), opened 18 November 2026, describes modular water-sensing cables with factory-installed plastic connectors that plug together. Official construction is two sensing wires, an alarm signal wire, and a continuity wire embedded in a fluoropolymer carrier rod. Official product characteristics include 0.24 in (6.0 mm) nominal cable diameter, high-visibility yellow color, and a maximum continuous operating temperature of 167°F (75°C). Official performance data on that sheet include a leak size to alarm of 2 in (50 mm) maximum at any point along the sensing cable, up to 5000 ft maximum system length, and a stated drying time of within 15 seconds after removal from standing water; those are manufacturer datasheet figures, not a YOCOOLING installation or performance guarantee. Official modular catalog lengths are listed from 1 m to 50 m, plus bulk cable TT1000-SC; those official catalog rows are not a YOCOOLING stock list, and a complete official catalog number is still required to enquire. The official nVent product URL opened today redirected to the Chemelex Raychem product page. Send the official catalog number, required length, and the alarm/locating module to be used. This page is not a stock, price, lead-time, approval or warranty statement. Official sources: https://cdn.chemelex.com/Product%20Documents/Data%20Sheets/RAYCHEMTraceTek-DS-H53870-TT1000-EN.pdf and https://www.chemelex.com/en-us/raychem/products/tt1000-water-sensing-cable-modular |
Can’t find your part? Send us the part number.
Request a Quote



























































































