The Lee Company

The Lee Company Miniature Liquid Flow-Regulating Insert

Official The Lee Company product page for the Flow Regulating Valve, opened 18 November 2026, describes a series for regulated liquid flow: official regulated flow-rate range 0.2 to 4 LPM, with official wording that rates outside this range are achievable upon request; official diameter range 5.5 mm to 12 mm; official mounting options DL Series into soft metal housings, press-in into plastic housings, and hose mount into EPDM or PTFE hoses. Official general performance also lists 40 bar maximum working pressure differential in the regulated flow direction, and a key-facts figure of 69 bar in aluminum. Official materials: 303 stainless body and cage, 302 stainless spring, and CDA 360 brass poppet. This page is a series reference; the exact official size, mount, flow setting and configuration must still be stated in a quote. Official figures are manufacturer ratings, not a YOCOOLING performance guarantee. Send the complete official configuration and quantity to enquire. Official source: https://www.theleeco.com/product/flow-regulating-valve/

Supply format
Component
Request a Quote

The Lee Company Miniature Liquid Flow-Regulating Insert

The Lee Company Miniature Liquid Flow-Regulating Insert

Specifications

ParameterValue
Flow Regulating Valve
FunctionNon-adjustable, pressure-compensating flow-regulating insert for chip/tray liquid cooling
Mounting optionsDL series into soft metal, press-in into plastic, or hose mount into EPDM/PTFE hose
Regulated flow range0.2–4 L/min listed range; higher flows require separate manufacturer configuration 1
Materials303 stainless-steel body/cage; 302 stainless spring; CDA 360 brass poppet
Specifications
Official product nameFlow Regulating Valve (The Lee Company product page, opened 18 November 2026)
Official regulated flow range0.2 to 4 LPM (official page; rates outside this range are described as achievable upon request, not as a listed stock range)
Official mounting optionsDL Series into soft metal; press-in into plastic; hose mount into EPDM or PTFE hose (official product page)
Official materialsBody 303 SS; cage 303 SS; spring 302 SS; poppet CDA 360 brass (official materials table)
Supply object
Supply formatComponent
Notes 1
  1. series selection range, not the preset of sample