The Lee Company

The Lee Company 6.5 mm Metal-Seat Press-In Check Valve

Official The Lee Company product page for the 6.5 mm Press-In Check Valve, opened 18 November 2026, lists a press-in cartridge for plastic housings: diameter 6.60 mm, 75 Lohms, metal-to-metal seat, and official materials 303 stainless body, 305 stainless cage, 302 stainless spring and 440C stainless ball. Official working pressure is dependent on housing material, configuration and operating conditions. Official leakage wording is 20 SCCM max. at 172 kPa (25 psid) on air; that is manufacturer test wording, not a YOCOOLING guarantee. Official part numbers on that page are configuration options, not a stock list. Send the official part number, housing plastic and quantity to enquire. Official source: https://www.theleeco.com/product/6-5-mm-press-in-check-valve/

Mounting configuration
Press-in cartridge for a plastic housing; metal-to-metal valve seat
Part diameter
6.60 mm
Flow resistance
75 Lohms
Official mounting
Press-in into plastic; diameter 6.60 mm
Request a Quote

The Lee Company 6.5 mm Metal-Seat Press-In Check Valve

The Lee Company 6.5 mm Metal-Seat Press-In Check Valve

Specifications

ParameterValue
6.5 mm Press-In Check Valve
Mounting configurationPress-in cartridge for a plastic housing; metal-to-metal valve seat
Part diameter6.60 mm
Flow resistance75 Lohms
Component materials303 stainless body, 305 stainless cage, 302 stainless spring and 440C stainless ball; metal-to-metal seat
Example part cracking pressureCCPI6510004S: 4 ± 3 kPa cracking-pressure example; no fixed series-wide setting 1
Specifications
Official product name6.5 mm Press-In Check Valve (The Lee Company product page, opened 18 November 2026)
Official mountingPress-in into plastic; diameter 6.60 mm
Official Lohm rate75 Lohms
Official seatMetal to metal (official product page)
Official materialsBody 303 SS; cage 305 SS; spring 302 SS; ball 440C SS (official materials table)
Notes 1
  1. One listed part example; maximum pressure depends on housing and installation