Product type

Check Valves

Valves that limit reverse flow through a liquid path.

9 products

View options
The Lee Company 6 mm Elastomer-Seat Plastic Press-In Check ValveThe Lee Company6 mm Elastomer-Seat Plastic Press-In Check ValveValves that limit reverse flow through a liquid path.
Configuration details

Official The Lee Company product page and PDS-210 for the 6 mm Press-In Zero Leak Check Valve, opened 18 November 2026, list a cartridge designed for installation into plastic housings, fittings or soft tubing: diameter 5.94 mm, 250 Lohms, elastomeric seat, and official materials 303 stainless body, 416 stainless cage, 302 stainless spring, 440C stainless ball, and EPDM or FKM seals. Official working pressure is dependent on housing material, configuration and operating conditions. Official PDS-210 states that these valves “are not designed to be installed into metal.” Official “zero drops/minute on hydraulic fluid” leakage wording is manufacturer test wording, not a YOCOOLING guarantee. Official part numbers (CZPM6001… FKM and CZPM6002… EPDM families) are configuration options, not a stock list. Send the official part number, flow orientation, housing plastic and quantity to enquire. Official sources: https://www.theleeco.com/product/6-mm-press-in-zero-leak-check-valve/ and https://www.theleeco.com/uploads/2024/08/PDS-210-2024-04-6mm-Zero-Leak-Press-In-Check-Valve.pdf

Request a Quote
The Lee Company 832 Side-Exit Metal-Insert Check ValveThe Lee Company832 Side-Exit Metal-Insert Check ValveValves that limit reverse flow through a liquid path.Manufacturer series: 832
Configuration details

Official The Lee Company product page for the 8 mm Insert Side Exit Check Valve, opened 18 November 2026, lists a threadless metal-insert cartridge: diameter 7.95 mm, metal-to-metal seat, official Lohm rate 65 Lohms in the forward configuration and 55 Lohms in the reverse configuration, and maximum working pressure differential 280 bar in the checked direction. Official materials: 303 stainless upper and lower bodies, 416 stainless pin, 302 stainless spring and 440C stainless ball. Official part-number families on that page include CCFM832… (forward, 65 Lohms) and CCRM832… (reverse, 55 Lohms); those official rows are configuration options, not a YOCOOLING stock list. The live URL still contains “832” and was not changed. Send the official part number, flow direction, housing and quantity to enquire. Official source: https://www.theleeco.com/product/8-mm-insert-side-exit-check-valve/

Request a Quote
FITOK CA Adjustable-Cracking Check ValveFITOKCA Adjustable-Cracking Check ValveOfficial FITOK Check Valves catalog was opened 18 November 2026 for the CA adjustable-cracking series.Manufacturer series: CA
Configuration details

This remains a series reference: the opening setting belongs to the selected spring/code and must be confirmed at commissioning. Send the complete official order code and required setting to enquire. This page is not a stock list.

Request a Quote
Configurations 4 products
CompareProduct / configurationQuote
The Lee Company 6 mm Elastomer-Seat Plastic Press-In Check ValveThe Lee Company6 mm Elastomer-Seat Plastic Press-In Check ValveValves that limit reverse flow through a liquid path.
Configuration details

Official The Lee Company product page and PDS-210 for the 6 mm Press-In Zero Leak Check Valve, opened 18 November 2026, list a cartridge designed for installation into plastic housings, fittings or soft tubing: diameter 5.94 mm, 250 Lohms, elastomeric seat, and official materials 303 stainless body, 416 stainless cage, 302 stainless spring, 440C stainless ball, and EPDM or FKM seals. Official working pressure is dependent on housing material, configuration and operating conditions. Official PDS-210 states that these valves “are not designed to be installed into metal.” Official “zero drops/minute on hydraulic fluid” leakage wording is manufacturer test wording, not a YOCOOLING guarantee. Official part numbers (CZPM6001… FKM and CZPM6002… EPDM families) are configuration options, not a stock list. Send the official part number, flow orientation, housing plastic and quantity to enquire. Official sources: https://www.theleeco.com/product/6-mm-press-in-zero-leak-check-valve/ and https://www.theleeco.com/uploads/2024/08/PDS-210-2024-04-6mm-Zero-Leak-Press-In-Check-Valve.pdf

Request a Quote
Component
Request a Quote
The Lee Company 6.5 mm Metal-Seat Press-In Check ValveThe Lee Company6.5 mm Metal-Seat Press-In Check ValveValves that limit reverse flow through a liquid path.
Configuration details

Official The Lee Company product page for the 6.5 mm Press-In Check Valve, opened 18 November 2026, lists a press-in cartridge for plastic housings: diameter 6.60 mm, 75 Lohms, metal-to-metal seat, and official materials 303 stainless body, 305 stainless cage, 302 stainless spring and 440C stainless ball. Official working pressure is dependent on housing material, configuration and operating conditions. Official leakage wording is 20 SCCM max. at 172 kPa (25 psid) on air; that is manufacturer test wording, not a YOCOOLING guarantee. Official part numbers on that page are configuration options, not a stock list. Send the official part number, housing plastic and quantity to enquire. Official source: https://www.theleeco.com/product/6-5-mm-press-in-check-valve/

Request a Quote
Component
Request a Quote
The Lee Company 558 LC High-Flow Press-In Check ValveThe Lee Company558 LC High-Flow Press-In Check ValveValves that limit reverse flow through a liquid path.
Configuration details

Official The Lee Company product page for the 5.5 mm Press-In LC Check Valve, opened 18 November 2026, lists a press-in cartridge for plastic housings: diameter 5.46 mm, 140 Lohms, metal-to-metal seat, and official materials 303 stainless body, 305 stainless cage, 302 stainless spring and 440C stainless ball. Official working pressure is dependent on housing material, configuration and operating conditions. The official data-center catalog describes this product as offering higher flow than standard 558 Series valves. It is not the metal-manifold 558 LC insert documented in official PDS-176 (150 Lohms, installation into metal); those official figures were not applied to this page. The live URL still contains “558-lc” and was not changed. Official part numbers on the 5.5 mm Press-In LC page are configuration options, not a stock list. Send the official part number, housing plastic and quantity to enquire. Official source: https://www.theleeco.com/product/5-5-mm-press-in-lc-check-valve/

Request a Quote
Component
Request a Quote
The Lee Company 8 mm Elastomer-Seat Metal-Insert Check ValveThe Lee Company8 mm Elastomer-Seat Metal-Insert Check ValveValves that limit reverse flow through a liquid path.
Configuration details

Official The Lee Company product page for the 8 mm Insert Zero Leak Check Valve, opened 18 November 2026, lists a threadless cartridge for installation into metal: diameter 7.95 mm, 250 Lohms, elastomeric seat, official valve flow direction Reverse Flow, and maximum working pressure differential 400 bar in the checked direction and 40 bar in the flow direction. Official materials: 303 stainless body, 416 stainless cage and pin, 302 stainless spring, 440C stainless ball, and EPDM or FKM seals. Official leakage wording is “Zero drops/minute on hydraulic fluid. Verified on air (0.05 SCCM maximum at 150 kPa)”; that is manufacturer test wording, not a YOCOOLING leakage guarantee. Official part numbers (CZRM8001… FKM and CZRM8002… EPDM families) are configuration options, not a YOCOOLING stock list. Send the official part number, cracking pressure, seal, housing material and quantity to enquire. This page is not a stock, price or warranty statement. Official source: https://www.theleeco.com/product/8-mm-insert-zero-leak-check-valve/

Request a Quote
Component
Request a Quote
The Lee Company 832 1 product
CompareProduct / configurationQuote
The Lee Company 832 Side-Exit Metal-Insert Check ValveThe Lee Company832 Side-Exit Metal-Insert Check ValveValves that limit reverse flow through a liquid path.Manufacturer series: 832
Configuration details

Official The Lee Company product page for the 8 mm Insert Side Exit Check Valve, opened 18 November 2026, lists a threadless metal-insert cartridge: diameter 7.95 mm, metal-to-metal seat, official Lohm rate 65 Lohms in the forward configuration and 55 Lohms in the reverse configuration, and maximum working pressure differential 280 bar in the checked direction. Official materials: 303 stainless upper and lower bodies, 416 stainless pin, 302 stainless spring and 440C stainless ball. Official part-number families on that page include CCFM832… (forward, 65 Lohms) and CCRM832… (reverse, 55 Lohms); those official rows are configuration options, not a YOCOOLING stock list. The live URL still contains “832” and was not changed. Send the official part number, flow direction, housing and quantity to enquire. Official source: https://www.theleeco.com/product/8-mm-insert-side-exit-check-valve/

Request a Quote
Manufacturer series: 832Component
Request a Quote
FITOK CA 1 product
CompareProduct / configurationQuote
FITOK CA Adjustable-Cracking Check ValveFITOKCA Adjustable-Cracking Check ValveOfficial FITOK Check Valves catalog was opened 18 November 2026 for the CA adjustable-cracking series.Manufacturer series: CA
Configuration details

This remains a series reference: the opening setting belongs to the selected spring/code and must be confirmed at commissioning. Send the complete official order code and required setting to enquire. This page is not a stock list.

Request a Quote
Manufacturer series: CAComponent
Request a Quote
FITOK CH 1 product
CompareProduct / configurationQuote
FITOK CH Floating-Seal Fixed-Cracking Check ValveFITOKCH Floating-Seal Fixed-Cracking Check ValveOfficial FITOK Check Valves catalog was opened 18 November 2026 for the CH floating-seal fixed-cracking series.Manufacturer series: CH
Configuration details

This remains a series reference. Send the complete official order code, tube-end size and fluid to enquire. This page is not a stock list.

Request a Quote
Manufacturer series: CHComponent
Request a Quote
FITOK CL 1 product
CompareProduct / configurationQuote
FITOK CL Union-Bonnet Stainless Check ValveFITOKCL Union-Bonnet Stainless Check ValveOfficial FITOK Check Valves catalog was opened 18 November 2026 for the CL union-bonnet series.Manufacturer series: CL
Configuration details

This remains a series reference. The official catalog is the place to confirm installation orientation and whether an opening-pressure option is stated for the selected code. Send the complete official order code and end size to enquire. This page is not a stock list.

Request a Quote
Manufacturer series: CLComponent
Request a Quote
FITOK CO 1 product
CompareProduct / configurationQuote
FITOK CO Compact Fixed-Cracking Check ValveFITOKCO Compact Fixed-Cracking Check ValveOfficial FITOK Check Valves catalog was opened 18 November 2026 for the CO compact fixed-cracking series.Manufacturer series: CO
Configuration details

This remains a series reference: both ends, body, seal and cracking-pressure code must be fixed by a complete official order code. Send that code, flow direction and fluid to enquire. This page is not a stock list.

Request a Quote
Manufacturer series: COComponent
Request a Quote

Compare configurations