The Lee Company

The Lee Company 558 LC High-Flow Press-In Check Valve

Official The Lee Company product page for the 5.5 mm Press-In LC Check Valve, opened 18 November 2026, lists a press-in cartridge for plastic housings: diameter 5.46 mm, 140 Lohms, metal-to-metal seat, and official materials 303 stainless body, 305 stainless cage, 302 stainless spring and 440C stainless ball. Official working pressure is dependent on housing material, configuration and operating conditions. The official data-center catalog describes this product as offering higher flow than standard 558 Series valves. It is not the metal-manifold 558 LC insert documented in official PDS-176 (150 Lohms, installation into metal); those official figures were not applied to this page. The live URL still contains “558-lc” and was not changed. Official part numbers on the 5.5 mm Press-In LC page are configuration options, not a stock list. Send the official part number, housing plastic and quantity to enquire. Official source: https://www.theleeco.com/product/5-5-mm-press-in-lc-check-valve/

Mounting configuration
Press-in cartridge for a plastic housing; metal-to-metal valve seat
Part diameter
5.46 mm
Official mounting
Press-in into plastic; diameter 5.46 mm
Official seat
Metal to metal (official product page)
Request a Quote

The Lee Company 558 LC High-Flow Press-In Check Valve

The Lee Company 558 LC High-Flow Press-In Check Valve

Specifications

ParameterValue
558 LC Series Press-In Check Valve
Mounting configurationPress-in cartridge for a plastic housing; metal-to-metal valve seat
Part diameter5.46 mm
Flow resistance140 Lohms; manufacturer describes higher flow capacity than its standard 558 Series
Component materials303 stainless body, 305 stainless cage, 302 stainless spring and 440C stainless ball; metal-to-metal seat
Example part cracking pressureCLCP5510004S: 4 ± 3 kPa cracking-pressure example in the plastic-housing press-in series 1
Specifications
Official product name5.5 mm Press-In LC Check Valve (official product page, opened 18 November 2026). Distinct from the metal-manifold 558 LC insert in PDS-176 (150 Lohms), which was not applied here.
Official mountingPress-in into plastic; diameter 5.46 mm
Official Lohm rate140 Lohms (official 5.5 mm Press-In LC page; not the 150 Lohm metal 558 LC datasheet)
Official seatMetal to metal (official product page)
Official materialsBody 303 SS; cage 305 SS; spring 302 SS; ball 440C SS (official materials table)
Notes 1
  1. One listed part example; not the separate metal-housing insert series