GF Piping Systems
GF Piping Systems PVDF In-Rack Liquid Cooling Manifold
Official Georg Fischer Piping Systems In-Rack Manifold fact sheet, opened 18 November 2026, describes a custom-PVDF manifold for direct liquid cooling. Official technical data: pressure rating PN10; material PVDF; colour opaque; temperature range −20 °C to 80 °C (−4 °F to 176 °F); official flammability standard UL 94 V-0 (manufacturer wording, not a YOCOOLING certification); inner surface Ra < 0.5 μm (20 μin) for injection-moulded and extruded components; capped ports; configuration top or bottom feed; options include dimension, length, ports and quick disconnects, with optional air bleeder, draining or special ports. Official quality-control wording: 100% pressure tested with water before shipment; official “system lifetime 25 years” is manufacturer wording, not a YOCOOLING warranty. The official illustration of a 132 kW, 48U, 48-outlet example at about 6 L/min per outlet with PG25 is a manufacturer design example, not this page’s configuration and not a YOCOOLING performance guarantee. The fact sheet states that its technical data are not binding unless confirmed in writing and do not constitute warranted characteristics; that is manufacturer wording. Send the required rack geometry, port map, connections and quantity to enquire. Official source: https://www.gfps.com/content/dam/gfps/com/brochures-and-flyers/en/gfps-datasheet-in-rack-manifold-en.pdf This page is not a stock, price or warranty statement.
Specifications
| Parameter | Value |
|---|---|
| GF in-rack manifold | |
| Material | PVDF |
| Mounting | top feed; bottom feed |
| Integrated components | main connections; branch ports; quick disconnects; optional air bleed; optional drain |
| Test conditions | 100% pressure tested with water before shipment; acceptance pressure/time are not stated in the sheet and must be agreed. |
| PVDF in-rack manifold / factsheet 04.26 | |
| Pressure designation | PN10 1 |
| Temperature range | maximum: 80; minimum: -20 °C 2 |
| PVDF in-rack manifold / M1161 quote sheet | |
| Geometry rfq inputs | Maximum length, available width/depth, outer diameter, outlet count, initial port offset u0 and subsequent spacing u1; attach a drawing for non-uniform spacing. 3 |
| Connection rfq inputs | Specify the exact quick-disconnect interface, nominal diameter and thread connection; listed supplier alternatives do not imply cross-brand interchangeability. 4 |
| Feed and service options | Top or bottom feed, straight or 90-degree feed geometry, orientation, end cap, vent or drain; define the installed routing. 5 |
| Specifications | |
| Official series document | GF In-Rack Manifold fact sheet, opened 18 November 2026 (custom-series, not a single stock SKU) |
| Official material and rating | PVDF; PN10; official temperature range −20 °C to 80 °C; colour opaque |
| Official configuration options | Top or bottom feed; official options include dimension, length, ports and quick disconnects; optional air bleeder, draining or special ports |
| Official quality-control wording | 100% pressure tested with water before shipment (official fact sheet). Official “system lifetime 25 years” and UL 94 V-0 are manufacturer wording, not a YOCOOLING warranty or certification. |
Notes 5
- Nominal designation; allowable pressure depends on temperature, coolant and final assembly. Page 2 derating curve applies.
- Datasheet temperature limits are not a rectangular PN10 operating envelope; consult page 2 pressure-temperature curve.
- Required design inputs, not fixed catalog dimensions
- Manufacturer blank quote form options; compatibility still requires matching interface drawings
- Custom-design inputs in the quote sheet; each arrangement requires drawing confirmation
