Product type
Fittings & Adapters
Fittings and adapters joining tube, hose or threaded interfaces.
DanfossFF4514-2024-568 90° Swivel Hose-to-Rack Manifold AdapterFittings and adapters joining tube, hose or threaded interfaces.Configuration details
Official Danfoss PowerSource page for catalog item FF4514-2024-568 (item 12025953), opened 18 November 2026, lists a 90 Degree adapter-elbow in 304 stainless steel: end 1 is male 1179-2 BSPP type E (light duty) G 1 1/4-11 (-20), end 2 is male barb -24, seal material ethylene propylene (EPDM) with special requirement EPR, working pressure 10 bar / 145.00 PSI, working temperature 3 to 65 °C, drop dimension 104.50 mm, and hex sizes 65.000 mm and 70.000 mm. The official item type is Adapter-elbow; the earlier “swivel” wording on this listing is not used on that official table, so this page no longer presents the part as a swivel. Today’s official PowerSource table does not list proof or burst pressure for this catalog item; those figures are not added or confirmed here. Send the exact official catalog item FF4514-2024-568, the mating hose and port, coolant and quantity to enquire. This page is not a stock, price, lead-time or warranty statement.
FITOK1/2 × 1/4 in. Reducing Tube UnionFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: SS-U-FL8-FL4Configuration details
Official FITOK product page opened 18 November 2026 lists SS-U-FL8-FL4 as a 316 stainless steel 6D-series straight reducing tube fitting with a 1/2 in. tube-fitting port and a 1/4 in. tube-fitting port. Send that exact part number, both tube sizes and quantity to enquire. This page is not a stock list.
AODSONWeld-On Saddle Threaded Branch OutletFittings and adapters joining tube, hose or threaded interfaces.Configuration details
Official AODSON page for stainless-steel weld-on threaded outlets, opened 18 November 2026, describes a custom weld-on saddle threaded outlet, branch boss or threaded pipe socket with a concave saddle contour machined to match a specified host-pipe outside diameter. Official thread configuration is female internal or male external, with official thread-form options including NPT, BSP, BSPT, metric and UN, subject to drawing review. Official material wording: stainless grade is selected to the drawing and service; 304 and 316 are named as common options that can be evaluated, not a verified grade for A part. Host radius, weld procedure and finished-assembly acceptance remain drawing-defined. Official source: https://www.aodson.com/products/5134.html This page is not a stock, price or warranty statement.
Configurations 12 products
| Compare | Product / configuration | Quote |
|---|---|---|
DanfossFF4514-2024-568 90° Swivel Hose-to-Rack Manifold AdapterFittings and adapters joining tube, hose or threaded interfaces.Configuration detailsOfficial Danfoss PowerSource page for catalog item FF4514-2024-568 (item 12025953), opened 18 November 2026, lists a 90 Degree adapter-elbow in 304 stainless steel: end 1 is male 1179-2 BSPP type E (light duty) G 1 1/4-11 (-20), end 2 is male barb -24, seal material ethylene propylene (EPDM) with special requirement EPR, working pressure 10 bar / 145.00 PSI, working temperature 3 to 65 °C, drop dimension 104.50 mm, and hex sizes 65.000 mm and 70.000 mm. The official item type is Adapter-elbow; the earlier “swivel” wording on this listing is not used on that official table, so this page no longer presents the part as a swivel. Today’s official PowerSource table does not list proof or burst pressure for this catalog item; those figures are not added or confirmed here. Send the exact official catalog item FF4514-2024-568, the mating hose and port, coolant and quantity to enquire. This page is not a stock, price, lead-time or warranty statement. | ||
FITOK1/2 × 1/4 in. Reducing Tube UnionFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: SS-U-FL8-FL4Configuration detailsOfficial FITOK product page opened 18 November 2026 lists SS-U-FL8-FL4 as a 316 stainless steel 6D-series straight reducing tube fitting with a 1/2 in. tube-fitting port and a 1/4 in. tube-fitting port. Send that exact part number, both tube sizes and quantity to enquire. This page is not a stock list. | ||
FITOK1/2 × 1/4 × 1/2 in. Reducing TeeOfficial FITOK product page opened 18 November 2026 lists SS-TTT-FL8-FL4-FL8 as a 316 stainless steel 6D-series tee with tube-fitting ports of 1/2 in., 1/4 in. and 1/2 in.Manufacturer model: SS-TTT-FL8-FL4-FL8Configuration detailsSend that exact part number, branch orientation and quantity to enquire. This page is not a stock list. | ||
FITOK1/2 in. Twin-Ferrule Straight UnionOfficial FITOK product page opened 18 November 2026 lists SS-U-FL8 as a 316 stainless steel 6D-series straight tube fitting with 1/2 in. tube-fitting ports on both ends.Manufacturer model: SS-U-FL8Configuration detailsSend that exact part number, tubing specification and quantity to enquire. This page is not a stock list or a pressure rating for an assembled joint. | ||
AODSONWeld-On Saddle Threaded Branch OutletFittings and adapters joining tube, hose or threaded interfaces.Configuration detailsOfficial AODSON page for stainless-steel weld-on threaded outlets, opened 18 November 2026, describes a custom weld-on saddle threaded outlet, branch boss or threaded pipe socket with a concave saddle contour machined to match a specified host-pipe outside diameter. Official thread configuration is female internal or male external, with official thread-form options including NPT, BSP, BSPT, metric and UN, subject to drawing review. Official material wording: stainless grade is selected to the drawing and service; 304 and 316 are named as common options that can be evaluated, not a verified grade for A part. Host radius, weld procedure and finished-assembly acceptance remain drawing-defined. Official source: https://www.aodson.com/products/5134.html This page is not a stock, price or warranty statement. | ||
AODSONThree-Segment Hinged Sanitary Pipe ClampOfficial AODSON page for a duplex stainless three-segment sanitary pipe clamp, opened 18 November 2026, describes three hinged clamp segments with a threaded wing-nut closure.Configuration detailsOfficial material options are 2205 duplex or 2507 super-duplex stainless steel, with official selection wording that 2507 is described as offering higher pitting, crevice-corrosion and strength capability for more severe environments, subject to engineering review; that comparison is manufacturer wording, not a YOCOOLING corrosion guarantee. Official connection wording: for compatible sanitary ferrules and gaskets; ferrule profile must be confirmed before ordering. Official size wording: final clamp diameter follows the selected connection standard. Official service-limit wording: allowable pressure and temperature depend on clamp size, ferrule, gasket, material and the applicable piping standard, and the clamp alone does not define the completed-joint rating. Official source: https://www.aodson.com/products/5077.html This page is not a stock, price or warranty statement. | ||
AODSONTwo-Piece Hinged Sanitary Pipe ClampFittings and adapters joining tube, hose or threaded interfaces.Configuration detailsOfficial AODSON page for a 2205 duplex stainless two-piece sanitary quick-release clamp, opened 18 November 2026, describes a hinged ring with an adjustable threaded wing-nut closure. Official construction options are light, medium-duty thickened and heavy-duty thickened versions. Official connection wording: for compatible sanitary ferrules and gaskets; the ferrule profile and outside diameter must be confirmed. Official reference tube/ferrule OD option pairs include 38/50.5, 51/64, 63/77.5, 76/91, 89/106, 102/119, 133/145 and 159/183 mm, to be verified against the selected standard before ordering; these are official catalog options, not a stock list. Official service-limit wording: allowable pressure and temperature depend on clamp size, construction, ferrules, gasket, assembly and the governing piping standard, and the complete joint—not the clamp alone—determines safe limits. Official source: https://www.aodson.com/products/5087.html This page is not a stock, price or warranty statement. | ||
AODSONMale-Female 90° Stainless Street ElbowFittings and adapters joining tube, hose or threaded interfaces.Configuration detailsOfficial AODSON page for 304 stainless steel male-female street elbows, opened 18 November 2026, describes a 90° adapter with one female internal thread and one male external thread around a square wrenching body. Official material is 304 stainless steel as shown, with 316L and other grades subject to service review. Official thread-form options include G/BSPP, BSPT/R, NPT and metric. Official size wording notes a 1/4-inch marking shown, with additional nominal sizes produced to specification; that marking does not by itself establish the thread standard or a pressure rating. Ratings and tolerances are officially confirmed from the approved drawing, material, thread form, temperature and test requirements. Official source: https://www.aodson.com/products/5155.html This page is not a stock, price or warranty statement. | ||
AODSONForged Stainless Threaded Pipe CapOfficial AODSON page for 3000LB forged stainless steel threaded pipe caps, opened 18 November 2026, describes a forged female threaded cap with a closed end.Configuration detailsOfficial material options include 304 stainless as shown, with 316L and other grades subject to order review. Official pressure-class wording is “3000LB configuration shown,” with other classes subject to specification review; 3000LB is a fitting class designation, not a 3000 psi working-pressure claim. Official thread wording lists NPT as shown, with BSPT/Rc or other specified threads subject to drawing and standard confirmation. Nominal size, standard and allowable pressure remain specified to the approved drawing. Official source: https://www.aodson.com/products/5143.html This page is not a stock, price or warranty statement. | ||
AODSONInternal-Hex Flange Port Plug with SealFittings and adapters joining tube, hose or threaded interfaces.Configuration detailsOfficial AODSON page for stainless-steel hex-socket flange pipe plugs, opened 18 November 2026, describes a male-threaded flange plug with an internal hex socket and an elastomer sealing ring. Official thread options include metric, BSPP, BSPT, NPT or drawing-specific forms. Official wording states that seal performance depends on groove geometry, flange flatness, surface finish, mating-face condition, elastomer compound, compression, installation torque, fluid, temperature and pressure, and that those items should be specified together. Official source: https://www.aodson.com/products/5037.html This page is not a stock, price or warranty statement. | ||
AODSONExternal-Hex Male Threaded Port PlugOfficial AODSON page for stainless-steel hex-head pipe plugs, opened 18 November 2026, describes a solid male-threaded hex-head plug.Configuration detailsOfficial thread options include NPT, BSPT, BSPP, metric or drawing-specific tapered and parallel threads. Official sealing wording lists tapered-thread sealant, gasket, O-ring or a project-specific face seal as defined by the port design. The official page states that tapered and parallel pipe threads seal differently and must not be treated as interchangeable. Official source: https://www.aodson.com/products/5025.html This page is not a stock, price or warranty statement. | ||
AODSONExternal-Square Male Threaded Port PlugOfficial AODSON page for stainless-steel square-head pipe plugs, opened 18 November 2026, describes a male-threaded plug with an external square drive.Configuration detailsOfficial material wording includes stainless steel, including 304 when specified and verified, with other grades subject to application review. Official thread options include NPT, BSPT, BSPP, metric or drawing-specific forms. Official sealing options include taper-thread interference, sealing compound, tape, gasket or a project-specific arrangement. Official source: https://www.aodson.com/products/5031.html This page is not a stock, price or warranty statement. |
SMC KQG2 8 products
| Compare | Product / configuration | Quote |
|---|---|---|
SMCSUS316 Reducing Y-Tube UnionFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2U06-08Configuration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2U06-08 as a SUS316 different-diameter union Y between ø6 mm and ø8 mm tubing, with a catalog effective area of 13.4 mm² stated for FEP tube. Send that exact official model to enquire. This page is not a stock list. | ||
SMCSUS316 Panel-Mount Straight UnionFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2E06-00Configuration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2E06-00 as a SUS316 panel-mount (bulkhead) connector for ø6 mm tubing with an M14 × 1 mounting thread, and a catalog effective area of 13.1 mm² stated for FEP tube. Send that exact official model and panel details to enquire. This page is not a stock list. | ||
SMCSUS316 Extended Male ElbowFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2W06-02SConfiguration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2W06-02S as a SUS316 extended male elbow for ø6 mm tubing and R 1/4 thread, with a catalog effective area of 10.9 mm² stated for FEP tube. It is a different official row from the standard elbow KQG2L06-02S. Send the exact official model to enquire. This page is not a stock list. | ||
SMCSUS316 Straight Male Push-In FittingFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2H06-02SConfiguration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2H06-02S as a SUS316 male connector for ø6 mm tubing and R 1/4 thread, with a catalog effective area of 13.1 mm² stated for FEP tube. Send that exact official model, tube type and quantity to enquire. This page is not a stock list. | ||
SMCSUS316 Male Elbow Push-In FittingFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2L06-02SConfiguration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2L06-02S as a SUS316 male elbow for ø6 mm tubing and R 1/4 thread, with a catalog effective area of 11.4 mm² stated for FEP tube. Send that exact official model to enquire. This page is not a stock list. | ||
SMCSUS316 Reducing Straight UnionFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2H06-08Configuration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2H06-08 as a SUS316 reducing straight union between ø6 mm and ø8 mm tubing, with a catalog effective area of 13.1 mm² stated for FEP tube. Send that exact official model and both tube sizes to enquire. This page is not a stock list. | ||
SMCSUS316 Equal-Tube Tee UnionFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2T06-00Configuration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2T06-00 as a SUS316 equal-tube union tee with ø6 mm connections, and a catalog effective area of 13.4 mm² stated for FEP tube. This is a different official row from the threaded-branch tee KQG2T06-02S. Send the exact official model to enquire. This page is not a stock list. | ||
SMCSUS316 Male-Branch Tee FittingFittings and adapters joining tube, hose or threaded interfaces.Manufacturer model: KQG2T06-02SConfiguration detailsOfficial SMC KQG2 catalog opened 18 November 2026 lists KQG2T06-02S as a SUS316 male-branch tee for two ø6 mm tube connections and an R 1/4 male-thread branch, with a catalog effective area of 13.9 mm² stated for FEP tube. Send that exact official model to enquire. This page is not a stock list. |
Can’t find your part? Send us the part number.
Request a Quote















