FITOK

FITOK Manual Fine-Metering Valve

Official FITOK Metering Valves catalog and metering-valve category were opened 18 November 2026. This remains a manual fine-metering valve series reference (straight or angle pattern). An exact complete order code is still required for body pattern, end type, stem and handle. Send that official ordering code, port size and the intended fluid to enquire. This page is not a stock list or a site-wide flow-capacity claim.

Maximum flow coefficient cv
0.15 1
Orifice
3.25 mm 1
Stem taper
6.5 degree 1
Opening turns
10 to 11 turns 1
Request a Quote

FITOK Manual Fine-Metering Valve

FITOK Manual Fine-Metering Valve

Specifications

ParameterValue
ML series
Maximum flow coefficient cv0.15 1
Orifice3.25 mm 1
Stem taper6.5 degree 1
Opening turns10 to 11 turns 1
Flow patternsStraight and angle configurations 1
Handle optionsRound or vernier handle; panel mounting available 1
Shutoff functionListed for ML series; do not infer that every metering valve provides shutoff 1
Specifications
Official metering valves cataloghttps://www.fitok.com/tmp/file/Metering_Valves_EN.pdf (opened 18 November 2026)
Official series categoryhttps://www.fitok.com/en/product/category-59.html (opened 18 November 2026; Metering Valves)
Notes 1
  1. Manufacturer metering-valve example. Cv is a coefficient, not litres per minute or a guaranteed loop flow. Exact material, seal, fluid and operating conditions remain configuration-specific.