The Lee Company
The Lee Company 6.5 mm Metal-Seat Press-In Check Valve
Official The Lee Company product page for the 6.5 mm Press-In Check Valve, opened 18 November 2026, lists a press-in cartridge for plastic housings: diameter 6.60 mm, 75 Lohms, metal-to-metal seat, and official materials 303 stainless body, 305 stainless cage, 302 stainless spring and 440C stainless ball. Official working pressure is dependent on housing material, configuration and operating conditions. Official leakage wording is 20 SCCM max. at 172 kPa (25 psid) on air; that is manufacturer test wording, not a YOCOOLING guarantee. Official part numbers on that page are configuration options, not a stock list. Send the official part number, housing plastic and quantity to enquire. Official source: https://www.theleeco.com/product/6-5-mm-press-in-check-valve/
- Mounting configuration
- Press-in cartridge for a plastic housing; metal-to-metal valve seat
- Part diameter
- 6.60 mm
- Flow resistance
- 75 Lohms
- Official mounting
- Press-in into plastic; diameter 6.60 mm
Specifications
| Parameter | Value |
|---|---|
| 6.5 mm Press-In Check Valve | |
| Mounting configuration | Press-in cartridge for a plastic housing; metal-to-metal valve seat |
| Part diameter | 6.60 mm |
| Flow resistance | 75 Lohms |
| Component materials | 303 stainless body, 305 stainless cage, 302 stainless spring and 440C stainless ball; metal-to-metal seat |
| Example part cracking pressure | CCPI6510004S: 4 ± 3 kPa cracking-pressure example; no fixed series-wide setting 1 |
| Specifications | |
| Official product name | 6.5 mm Press-In Check Valve (The Lee Company product page, opened 18 November 2026) |
| Official mounting | Press-in into plastic; diameter 6.60 mm |
| Official Lohm rate | 75 Lohms |
| Official seat | Metal to metal (official product page) |
| Official materials | Body 303 SS; cage 305 SS; spring 302 SS; ball 440C SS (official materials table) |
Notes 1
- One listed part example; maximum pressure depends on housing and installation
