The Lee Company
The Lee Company BR Locking-End Metal Safety Screen
Official The Lee Company product page for the 12 mm BR Series Safety Screen Filter, opened 18 November 2026, lists a BR Series screen for installation into metal: part diameter 11.93 mm, micron rating 40 to 170 microns, screenable passageway diameter as large as 9.60 mm, woven wire mesh, bidirectional flow, and official Lohm rate as low as 22 Lohms. Official materials: 305 stainless body, 303 stainless pintal, and 316 stainless screen. Official minimum burst pressure 24 MPa is stated for a fully clogged safety screen filter; that is manufacturer wording, not a YOCOOLING burst or system rating. Official part numbers on that page are configuration options, not a stock list. Send the official part number, micron rating and housing details to enquire. Official source: https://www.theleeco.com/product/12-mm-br-series-safety-screen-filter/
- Mounting
- BR locking end for retention in a flat-bottom metal-housing hole
- Part diameter
- 11.93 mm
- Micron options
- 40–170 microns by configuration
- Passageway
- Screenable passageway as large as 9.60 mm
Specifications
| Parameter | Value |
|---|---|
| 12 mm BR Series Safety Screen Filter | |
| Mounting | BR locking end for retention in a flat-bottom metal-housing hole |
| Part diameter | 11.93 mm |
| Micron options | 40–170 microns by configuration |
| Passageway | Screenable passageway as large as 9.60 mm |
| Body and screen material | 305 stainless body, 303 stainless pintal and 316 stainless woven-wire screen 1 |
| Specifications | |
| Official product name | 12 mm BR Series Safety Screen Filter (official product page, opened 18 November 2026) |
| Official mounting and diameter | BR Series into metal; part diameter 11.93 mm |
| Official micron rating | 40 to 170 microns (configuration-specific) |
| Official screenable passageway | As large as 9.60 mm (official product page) |
| Official materials | Body 305 SS; pintal 303 SS; screen 316 SS (official materials table) |
Notes 1
- Manufacturer component table; verify selected micron code and housing retention
