The Lee Company

The Lee Company Customer-Retained Cartridge Safety Screen

Official The Lee Company product page for the 10.0 mm Cartridge Safety Screen, opened 18 November 2026, lists a woven-wire cartridge designed to be placed in a flat-bottom hole and retained by a secondary means: mounting configuration Cartridge – Customer Retained, part diameter 9.93 mm, micron rating 40 to 300 microns, screenable passageway diameter as large as 7.56 mm, bidirectional flow, and official Lohm rate as low as 35 Lohms. Official materials: 305 stainless body, 17-7 stainless pintal, and 316 stainless screen. Official minimum burst pressure 24 MPa is stated for a fully clogged safety screen filter; that is manufacturer wording, not a YOCOOLING burst or system rating. Official part numbers on that page are configuration options, not a stock list. Send the official part number, micron rating and retention details to enquire. Official source: https://www.theleeco.com/product/10-0-mm-cartridge-safety-screen/

Part diameter
9.93 mm
Micron options
40–300 microns by configuration
Passageway
Screenable passageway as large as 7.56 mm
Official mounting and diameter
Cartridge, customer retained; part diameter 9.93 mm
Request a Quote

The Lee Company Customer-Retained Cartridge Safety Screen

The Lee Company Customer-Retained Cartridge Safety Screen

Specifications

ParameterValue
10 mm Cartridge Safety Screen Filter
MountingFlat-bottom cavity cartridge requiring a secondary customer retention feature
Part diameter9.93 mm
Micron options40–300 microns by configuration
PassagewayScreenable passageway as large as 7.56 mm
Body and screen material305 stainless body, 17-7 stainless pintal and 316 stainless woven-wire screen 1
Specifications
Official product name10.0 mm Cartridge Safety Screen (official product page, opened 18 November 2026)
Official mounting and diameterCartridge, customer retained; part diameter 9.93 mm
Official micron rating40 to 300 microns (configuration-specific)
Official screenable passagewayAs large as 7.56 mm (official product page)
Official materialsBody 305 SS; pintal 17-7 SS; screen 316 SS (official materials table)
Notes 1
  1. Customer-retained cartridge; no integral press-in or locking retention claim