The Lee Company

The Lee Company Fine-Grade Micro Press-In Safety Screen

Official The Lee Company product page for the 2.5 mm Press-In Safety Screen, opened 18 November 2026, lists a woven-wire screen for direct installation into plastic housings or fittings: part diameter 2.54 mm, micron rating 4 to 40 microns, screenable passageway diameter 2.36 mm, bidirectional flow, and official Lohm rate as low as 850 Lohms. Official materials: 303 stainless body and 316 stainless screen. Official working pressure is dependent on housing material, configuration and operating conditions. Official part numbers on that page are configuration options, not a stock list. Send the official part number, micron rating and housing plastic to enquire. Official source: https://www.theleeco.com/product/2-5-mm-press-in-safety-screen/

Mounting
Fine-grade press-in woven-wire screen for plastic housings or fittings
Part diameter
2.54 mm
Micron options
4–40 microns by configuration
Passageway
Screenable passageway 2.36 mm
Request a Quote

The Lee Company Fine-Grade Micro Press-In Safety Screen

The Lee Company Fine-Grade Micro Press-In Safety Screen

Specifications

ParameterValue
2.5 mm Press-In Safety Screen Filter
MountingFine-grade press-in woven-wire screen for plastic housings or fittings
Part diameter2.54 mm
Micron options4–40 microns by configuration
PassagewayScreenable passageway 2.36 mm
Body and screen material303 stainless body with 316 stainless woven-wire screen 1
Specifications
Official product name2.5 mm Press-In Safety Screen (official product page, opened 18 November 2026)
Official mounting and diameterPress-in into plastic; part diameter 2.54 mm
Official micron rating4 to 40 microns (configuration-specific)
Official screenable passageway2.36 mm (official product page)
Official materialsBody 303 SS; screen 316 SS (official materials table)
Notes 1
  1. Manufacturer component table for plastic-housing press-in screen