FITOK · CL
FITOK CL Union-Bonnet Stainless Check Valve
Manufacturer seriesCL
Official FITOK Check Valves catalog was opened 18 November 2026 for the CL union-bonnet series. This remains a series reference. The official catalog is the place to confirm installation orientation and whether an opening-pressure option is stated for the selected code. Send the complete official order code and end size to enquire. This page is not a stock list.
Specifications
| Parameter | Value |
|---|---|
| FITOK CL union-bonnet stainless check valve series | |
| Construction | All-stainless check valve with union bonnet; bonnet nut above body for specified horizontal installation 1 |
| Max working pressure | up to 414 bar 2 |
| Temperature span | -53 to 482 degC 3 |
| Tube end examples | CLSS-FL4, CLSS-FL6 and CLSS-FL8 use corresponding FITOK tube-fitting ends in the dimension table 4 |
| Reverse to forward flow coefficient | Less than 0.1% of forward-flow coefficient, as stated for CL series 5 |
| Opening pressure basis not catalogued | Unlike the adjacent CV, CA, CH, CO and COA opening-pressure entries, the FITOK CL series feature/ordering section does not give a nominal cracking or set-pressure option. It explicitly requires horizontal installation with the bonnet nut on top. Specify required opening/reseal behavior for the selected line and confirm with the supplier; do not transfer another series' spring rating. 6 |
| Specifications | |
| Official check valves catalog | https://www.fitok.com/tmp/file/Check_Valves_EN.pdf (opened 18 November 2026; covers CO, CH, CA and CL series) |
| Supply object | |
| Supply format | Component |
Notes 6
- Manufacturer stated orientation; not interchangeable with freely oriented inline series
- Manufacturer series maximum, not combined with the full listed temperature span
- Subject to pressure-temperature curve, exact seal and configuration
- Examples with separate dimensions; valve is not assigned a verified order code
- Manufacturer series statement, not a selected-valve leakage certificate or nominal cracking pressure; CL requires horizontal bonnet-up installation
- Documented absence in this catalogue; not a measured CL cracking pressure
