Danfoss · DST P140

Danfoss DST P140 MEMS Pressure Transmitter

SeriesDST P140

DST P140 is a MEMS pressure-transmitter series for liquid-cooling data centers. Range, signal and connections depend on the selected configuration.

Configuration shown: 075G4027

Gauge pressure range
0 to 10 barMeasuring range; not an overpressure rating.
Output signal
4 to 20 mA
Supply voltage
8 to 28 VDC
Wetted materials
AISI 304L and AISI 316L listed for wetted partsConfirm coolant and seal compatibility for the application.
Request a Quote

Danfoss DST P140 MEMS Pressure Transmitter

Danfoss DST MEMS Pressure Transmitter for Liquid Cooling

Specifications

ParameterValue
Danfoss DST P140 pressure transmitter series
ApplicationLiquid-cooling data-center pressure monitoring
Sensing and body designMEMS sensing technology with stainless-steel design and hermetically sealed media interface
Diagnostic optionAutomatic sensor-failure detection (optional)
Danfoss DST P140 075G4027
Gauge pressure range0 to 10 barMeasuring range; not an overpressure rating.
Output signal4 to 20 mA
Process and electrical connectionsG 1/4 A male pressure connection to ISO 1179-2; M12 × 1 electrical connectionMating connector is selected separately.
Supply voltage8 to 28 VDC
Wetted materialsAISI 304L and AISI 316L listed for wetted partsConfirm coolant and seal compatibility for the application.
Specifications shown for 075G4027. Other DST P140 variants use different ranges or connections.
Specifications
Official series documentsDST P110 / DST P140 for Data Center Liquid Cooling, AI570944104418en-000102, opened 18 November 2026; product page also opened the same day
Official ordering noteContact Danfoss for dedicated data-center code numbers; this page does not assign a store SKU
Official total error band (series)±0.5 % FS (20 °C − 60 °C), as stated in the official datasheet; FS = full scale
Official response time (series)< 2 ms (official datasheet)
Official overload / burst (series)Overload 4 × FS; burst 300 bar (absolute / sealed gauge) or 5 × FS (relative gauge). These are official series figures, not a selected code.
Official output options (series)4 − 20 mA, or ratiometric (10 – 90% Vss); exact output follows the official code
OCP wordingOfficial datasheet wording: “UL recognized and aligned with OCP recommendations.” Manufacturer wording only; not a YOCOOLING certification or OCP claim.
Official datasheet URLhttps://assets.danfoss.com/documents/latest/601238/AI570944104418en-000102.pdf
Official product page URLhttps://www.danfoss.com/en/products/sen/sensors-and-transmitters/industrial-pressure-transmitters/dst-p140-pressure-transmitter-for-water-and-air-applications/