Component selection guide

Hose & Tube Requirements

List the connections, length and operating conditions for your hose or tube assembly.

Illustrative red and blue hose assemblies with metal end connections.
On this page

Choose the routing form

A hose suits routes requiring flexibility and service movement; a formed tube requires controlled bends, datums and end geometry. The choice depends on space, connection loads, maintenance and assembly repeatability.

Identify the assembly being requested

State whether you need hose stock, a finished hose assembly, formed tube or separately supplied connections. Give an assembly drawing and revision where available. List included terminations, seals and clamps, and identify buyer-supplied parts. Hose stock and finished assemblies have different supply boundaries; a hose-body rating does not establish the finished assembly rating.

Record both ends

Provide a route sketch with the finished-length definition and tolerance, angular orientation, bend constraints and mounting points. For formed tube, include OD, wall, bend radii, datums and end geometry. For hose, include construction, ID, available OD envelope and termination method.

For both End A and End B Information to include
Reference Manufacturer part number or controlled interface drawing and revision.
Connection Thread or port geometry, seal arrangement and hose termination.
Counterpart Mating part, socket or plug reference, and who supplies each half.
Installation Angular orientation, hand-mate or blind-mate service, and access envelope.

If UQD is specified, include the required specification and revision, plus the maker’s instructions for the actual barb-and-hose combination. Use the QD and UQD selection guide for the interface review and browse quick disconnect couplings for component options.

Agree on assembly requirements

Identify the coolant product and concentration, wetted materials, and operating and peak pressure/temperature conditions. For single-phase cold-plate hose assemblies, add target flow and permitted assembly pressure drop.

State whether hydraulic data covers one component, a connected QD pair or the finished branch. Request the test fluid, temperature, flow path and method for the proposed configuration. Use the existing coolant and material questions, pressure terminology and test questions for the detailed review.

Quote Request Checklist

  • Part references or drawing revision, supply scope and quantity.
  • Finished dimensions, both connections and mating counterparts.
  • Coolant, service conditions, flow requirements and test scope.
  • Cleanliness, capping, identification, packaging and inspection documents.

Compare supplier quotations

Ask each quotation to identify included parts, drawing deviations, missing evidence and proposed alternatives. Agree on the complete assembly rating and acceptance documents for the selected configuration before order confirmation.

Related reading

If only some parts of a loop will be replaced after a leak, see What to send after a loop leak when only some liquid-cooling parts will be replaced.

A named hose-kit example, not a stock confirmation, is nVent HOFFMAN RCH12001.

An official size-table example for un-terminated EPDM coolant hose, not a stock confirmation, is CEJN thermal management hose 19 900 9704–9716.

Official-catalog stainless push-in fitting examples, not a stock list: SMC KQG2H06-02S, SMC KQG2L06-02S, and SMC KQG2H06-08.

An official PowerSource catalog-item example for a hose-to-manifold adapter — not a stock list — is Danfoss FF4514-2024-568 (official item type: 90° adapter-elbow).

Official manufacturer capability pages can also be used as specification examples when a formed-tube or custom pipe drawing is prepared (these links are not a stock statement): MFC formed stainless Y-tube assembly, AODSON custom 304 stainless CDU flanged pipe assemblies, and Deya stainless system-pipe module.

Official hose-stock and end-option specifications can also be used as examples when a V-ZEN 202AA EPDM cooling hose is identified from a drawing or marking (this link is not a stock statement): V-ZEN 202AA EPDM hose.