A cold-plate-side replacement quote is only useful if the connection details travel with the request. Naming “a CPU cold plate” or “the server-side hose” does not tell a supplier which half is installed, which thread or hose tail it uses, what seal is in the line, or what must still mate with parts you are not replacing. This page lists connection facts that belong in that quote. It corresponds to the existing Server / Cold-Plate Side family; it does not create a new category, and it does not rewrite that family page.
YOCOOLING coordinates supplier quotations for specified liquid-cooling components. This article is not a stock list, a price list, a lead-time promise, a warranty, or a claim that parts from two manufacturers will mate. Official catalog wording about industry standards or interchange is the manufacturer’s wording, not a YOCOOLING certification.
Say which side of the connection you are replacing
On the cold-plate side of a loop, a request usually involves some combination of the plate or node assembly, the quick disconnects at the plate or manifold, and the short hose or tube that reaches the rack distribution. Write down, for each line, whether you are replacing the socket, the plug, both halves, only the hose, or the plate/manifold itself. If a half stays in the rack, identify that remaining half with the same care as the part you want quoted.
If the failure started as a leak, also use the checklist in What to send after a loop leak when only some liquid-cooling parts will be replaced. Connection details do not replace a clear statement of what failed and what remains in service.
Capture the coupling identity, not just the family name
Family names such as UQD, LQC, BMQC, or Non-Drip are not order codes. For each coupling line, include:
- The exact manufacturer part number for the half you need, and the part number of the mating half if you can read it.
- Socket versus plug (coupling versus nipple), and whether the half is valved or open.
- The end connection actually on that half: thread standard and size, hose-tail size, or tube-fitting size.
- Seal material if it is marked or documented, and colour coding if present.
- Any keying, flange, or guided-blind-mate feature, including whether a misalignment allowance matters at the installed position.
A photo of the installed label or engraving is often more reliable than a remembered series name. The method in How to identify the installed UQD half from the label or a photo applies equally well to other labelled quick disconnects: send the picture, do not guess the suffix.
Named examples already on this site, useful when you are comparing an official part number — not as a stock list — include CEJN LQC 10 153 1290 / 10 153 6290, CEJN UQD06 10 153 1026 / 10 153 6676, CEJN BMQC 10 153 1990 / 10 153 6990, and CEJN Series 267 example 10 267 1220 / 10 267 6220. Read the official material on that last example carefully: the documented Series 267 pair is nickel-plated brass; the stainless counterpart is a different series.
Hose, tube, and plate-side ports
If a hose or tube is part of the replacement, specify it as its own line. Include inside diameter, official hose or tube part number if you have one, cut length, and the exact ends that must be attached. An un-terminated hose rating is not the rating of a finished assembly. The official CEJN size table recorded on CEJN peroxide-cured EPDM thermal management hose is a way to name a size code; it is not a confirmation that every size is in stock. The broader assembly questions on Hose and tube assembly Quote Request Checklist still apply.
For the plate, node manifold, or integrated tube circuit itself, include the installed port size and thread or fitting type, the number and direction of passes or branches, and any mounting or socket constraint that a replacement has to meet. The family overview at Server / Cold-Plate Side is the place this site groups those assemblies; it is not a list of interchangeable plates.
What to send when you cannot read a complete part number
If a marking is worn or a hose has no printed code, send what you can measure or photograph: overall length, thread pitch and diameter or a thread gauge reading, seal colour, and the mating half that will stay in the system. Say clearly which facts are measured and which are estimated. Do not fill the gap with a “compatible” manufacturer part number you have not verified on that day’s official catalog.
Do not treat two couplings that share a family name as a guaranteed pair, even when a manufacturer page discusses an industry standard. If you need a second source, say so and ask the supplier to state what they are actually offering, against which official code, and what remains unverified.
How to enquire
Send the short line list, photographs of labels and installed ends, and a note of what stays in service, from Request a Quote or Contact. Exact part numbers, both halves of each connection, and the hose or port details are what make a cold-plate-side replacement quote usable.
Named plate and assembly examples, useful when you are comparing an official part number or manufacturer table — not as a stock list — include Boyd Hi-Contact 4-pass 416501U00000G / 416601U00000G, Xindaaitech LGA4677 1U plate, and Xindaaitech SP5 / EPYC 9004 1U plate.